Will a 1999 chevy 1500 transmission fit in a 2000 chevy 2500 truck

Yes it is all the same apart from the truck transmission gear ratios. The engines are the same size.

The transmission in question is called, "4L60E" There are two versions. The 4L60E ran from 1992-1997. Then the 4L60E was updated and ran that version from (1996-2010). In 2002 GM introduced the 4L65E. So YES you should not have a problem fitting a 1998 chevy 1500 with a 4L60E into a 2001 Chevy 1500 with a 4L60E. You didn't mention that both were 2wd or 4wd. You can not convert a 2wd into a 4wd. I hope that helps, good luck.

A salvage yard should have the interchange books to tell you for sure. You'll need the model of each one, like 4L80 or 4L60.

nope wont work big difference 94 OBD 1 type and 1999 OBD 2 type transmission.electronics differents.

if brake pads are same check back to back the old and new brake pads if are same all you need press in the cilinder of the calipers and yours brake pads will be fit.

I doubt it. Most of the time the truck trans has the mounts in a different place and the tail shaft is a different size.
A trans shop or a salvage yard should be able to tell you for sure. Salvage yards have interchange info.

I have a Late 1999 Chevy Silverado C1500 Z71. I had one of the heater hose nozzle snap off this past weekend. I looks like the heater core hase some kind connection fitting. And I had the same situation!

check your pick up sensors

there's more than 1 and they are all inside the pan and in the valvebody be careful messing with this stuff it could become very costly very fast. good luck

hello, your truck will not shift from second to third . If it wont shift to third it is going to need new clutchs or seals installed in the transmission that is a common problem with the 4L60e transmission.