SOURCE: 1999 Toyota Corolla interior door handle
There's two screws by the handle, pull those out and you'll see how it all connects on the inside. I was able to remove my broken one, and drill a hole into the plastic where it broke and reuse it - it's lasted over 4 years now.
SOURCE: 2002 Toyota Celica GTS
Thanks you for asking for my assistance.
Let me clarify, the entire handle assembly is moving on the outside of the door when you open it; it is real loose? If so, there are two 10 millimeter bolts that hold the handle in place. Yes, you do have to pull off the door panel to access the handle bolts. I can give you the panel removal proceedure if you need it.
SOURCE: 2000 Toyota Corolla VE -- Glove Box Stuck
The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.
SOURCE: How can I fix the door handle on the inside of 1999 Toyota Coroll
It's probably broken, or unhooked. Just take your inner door panel off, and you'll soon figure out what's happening. Sometimes the rods get bent, or they come off the clip, or just need adjusting. And sometimes the handle itself is broken, but you can do it!
SOURCE: Inside handle will not open door. Can not figure
There are plastic clips that hold the rods in place - one for the rod that goes to the exterior handle and another that goes to the exterior lock. You need to snap the plastic clips around so they release and then the rods will pull right out.
657 views
Usually answered in minutes!
×