How do I remove a glove box on a 2001 Ford Escape

SOURCE: ABS on 2001 Ford Escape .

could you have a low or odd sized tire on the car?  have you bumped a sensor?  Is the light on?

Mike Butler

• 6674 Answers
• Posted on Jun 28, 2009

SOURCE: what is throubleshot p0113 at ford escape 2001

Intake air temperature sensor faulty. Depending on what engine, may be in side of air cleaner or air intake hose , or may be part of the MAF (mass airflow ) sensor. You can try cleaning MAF with tuner cleaner from radio shack or TV repair place.

SOURCE: location of the bank 1 sensor 2 O2 sensor on a 2001 ford escape

B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter

You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks

SOURCE: 2001 ford escape sometimes it wont start, then

Sounds like an air leak possibly, check all your vaccum lines that go into the intake manifold.

SOURCE: vent door stuck and can't remove glove box

why can't you remove the glove box? You can get at the door from under the dash but it's a ***** to do. try lubing the vent cables unless it uses the vacuum motor, if it uses the vac. motor it will be hard to get to without the glove box being out.

Testimonial: "Thanks! I just don't know how to remove the glovebox."