Location of modulator valve of a 01 montero sport

SOURCE: 1993 190e 2.6 transmission problem

I have a 93 MB 2.6 190E . went to junkyard, got same tranny, spent 500 bucks to replace. Drives fine. No metal shavings on mine either but changed tranny, ok.

Marvin

• 85242 Answers
• Posted on Feb 26, 2009

SOURCE: Location of the blower motr control module

replace the blower motor speed control module, that is the only cause of this problem that I know of, and u are about the 20 post for this issue that I have read, it has fixed the other ones..

SOURCE: Location of the blower motor control module

The module is located in the ducting for the heater and is accessed from the passenger area of the front seat. I think it is just under the dash but you may have to remove the glove box. it is a rectangular item held in with four screws. and should have two connectors going to it. You have to be sure to get the right replacement if you r replacing it.
thanks.

SOURCE: Changing transmission filter on Mitsubishi

FIRST YOU HAVE TO UNBOLT THE TRANSMISSION PAN ON THE BOTTOM OF THE TRANSMISSION. THERE WILL BE FLUID IN IT SO BE CAREFUL NO TO SPILL IT. AFTER THE PAN IS OFF YOU WILL SEE THE FILTER ON THE BOTTOM OF THE VALVE BODY. IT MAY BE BOLTED ON AS WELL. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

SOURCE: Montero Sport, Automatic transmission fluid change

I definetly highly reccomend you to use Mitsubishi genuine Diamond SPIII Fluid, you'll feel your transmission more powerfull, and will help you to keep it just like new. I've tried with "Import multivehicle" from Castrol but a within 6 months the gears began to slip.