2000 Oldsmobile Silhouette Logo

Related Topics:

Getting the battery out of a 2000 Olds Silhouette.

The bolt near the bottom of the battery. Got the rest done.

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Sep 25, 2008

SOURCE: Replacing dashboard lights on an 2000 Oldsmobile Silhouette Van?

the light bulbs are not replacable unless you can solder, you have to replace the complete instrument cluster, get one from a junk yard 100 bucks.

Ad

Anonymous

  • 1 Answer
  • Posted on Jan 17, 2009

SOURCE: my olds silhouette security light came on and would'nt start

I had a similar problem. Check your battery, it is probably on the verge of dying. My problem went away when the battery was replaced.

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Aug 13, 2009

SOURCE: Where is the low side port to recharge the AC on a

Follow hose from compressor or firewall & look for a valve sticking out with a plastic cap on it. Low side is the bigger diameter hose & piping.

Anonymous

  • 83 Answers
  • Posted on Sep 26, 2009

SOURCE: Need diagram of firing oreder for a 2000 olds

I can't upload the diagram but the firing order appears to be 1,4,6,3,2,5

Install the spark plug wire(s) (1, 3 and 5) to the engine right side spark plug(s).

Install the spark plug wire(s) to the retaining clips.

Install the spark plug wire(s) (2, 4 and 6) to the engine left side spark plug(s).

Install the spark plug wire(s) to the retaining clips.

You can get a copy of the service manual from Promanuals.net for cheap.

Anonymous

  • 2 Answers
  • Posted on Nov 12, 2009

SOURCE: how do t replace the alt. in a 2000 olds

Remove the two front motor mounts mounted on the frame above the radiator.This is not a weight bearing mount it is for vibration. The engine will not move much once removed. Ratchet the motor forward using a ratcheting strap hooked to the black arm that extends above the motor located on the right side. Remove the serpentine belt. Remove the two mounting bolts on the face of the alternator and the one behind the alternator. Remove the connections and alternator. To reinstall, reverse the process. You will not have enough clearance to remove the alternator without ratcheting the motor forward.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a 2002 Olds Silhouette that sat for 3 years. I tried to jump it with no battery. Not enough juice to get it started. I put a new battery in it and now I get no power anywhere.

Most common problem is bad connection at the battery, or battery cable end terminals, but yes, all cars I've worked on have fusible links, either near the battery or near the starter.
0helpful
2answers

HOW TO TAKE OUT BATTERY 2003 OLDS SIL

Remove wiper assembly plastic cover. Then remove front bolt that holds the cross brace bar over the battery. Loosen the bolt at the other end of the brace bar and rotate brace bar from over the battery to a new location and proceed to remove the plastic battery hold down mount on bottom of battery.Disconnect the negative then positive battery cables from the battery then rotate battery up and out of compartment -- this is a very tight fit. It will come out and the clearance is very small. This is a neat challenge. Be sure to buy proper size battery for replacemeent

Read more: http://wiki.answers.com/Q/How_do_you_remove_a_battery_from_an_Oldsmobile_Silhouette#ixzz1noNX2HXJ
2helpful
3answers

Battery is dead on my Olds Silhouette 2004. Can I replace it myself?

two bolts on the hold down bracket ... two nuts on the cables.

Check your radio for a security code removal requirement. Disconnect the minus cable first when you remove old battery ... attach the minus last when you put in the new. When youj are all done WASH YOUR HANDS AND ARMS!
1helpful
1answer

Where is the crank position sensor on the 2000 olds silhouette

Hello Cary.
Your Olds actually has two crank sensors.
Each one sends different information to the computer.
The 24x sensor...
Right side of the engine, at the end of the crankshaft, behind the harmonic balancer
And the 7x sensor is mounted at the rear of the engine just above the edge of the oil pan. This one is tricky to change. Difficult to access as you need to reach in between the trans output shaft and the engine block.
There is a small bolt that retains it but they stick in place by an "o" ring. Carefully turn and pry after removing the retainer bolt.
Hope this helps you with your repair.

Thank you for using FixYa
KL
0helpful
1answer

Just Changed battery on my Olds Silhouette. Car cranks ok but does not start. What should I check? Thank you

1) Is the ignition circuit ON? (are you getting spark) 2) Is there fuel getting to the engine. 3) Is there air getting to the engine. 4) Is the engine getting the proper timing signals.
2helpful
2answers

I need to replace a coil pack on my 2000 Olds Silhouette. I know I have to rotate the engine. But am unsure on how to do it correctly.

you do not have to rotate the engine to change the coil packs. just turn the van off and unplug the coil pack un bolt it and pull the spark plug wires off
0helpful
2answers

My olds silhouette security light came on and would'nt start

I had a similar problem. Check your battery, it is probably on the verge of dying. My problem went away when the battery was replaced.
Not finding what you are looking for?

168 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...