You'll be very lucky if find that without paying for information system like alldata or the factory web site . Go to oem1stop.com and click on crysler . Products Mopar Tech Authority
SOURCE: Chrysler touring 200, 2012 common problems
1) Reset the ignition timing according with the specification manufacturer.
2) Test the primary circuit and secondary circuit from ignition system and replace, see the diagrams, God bless you.
There is no drain per say. This is caused by condensation forming on the lines. When you park your car after running the car you see water on the ground that's the same thing. Check in the engine compartment up by the windshield and wipers and make sure there are no leaves or stuff blocking the drain holes..
If that's not it you can take it to AAMCO for a free A/C check if there is one near you.
Hope this helps Mike
SOURCE: Where is fuel pump relay on 2012 chrysler 200 2.4l
Underhood fuse box. If lid to box is not labeled then owners manual will show location.
1,285 views
Usually answered in minutes!
×