SOURCE: need torque settings for honda ballade cylinder
dear friend-your torque setting is cold 66 nm
SOURCE: HOW DO I CHANGE FUEL
I have the same problem few days ago and found my solution on Fixya Expert Sources website. Here you will get all the top sources of your problem. All the sources of this site provided by top Fixya
Gurus. Have a good look at the sources of the page. Go through
the sources to find your solution. Hope it will help.
View Count:3
SOURCE: which oil recommended for my honda ballade luxline 150i
Use the cheapest oil you can buy from the supermarket and change it every 5000miles and a oil filter every third oil change .it will run for ever like this even more so as its a honda
Testimonial: "yes thank you."
SOURCE: Does a honda ballade 150i have a crankshaft sensor
what year? They've been made with many changes since 1980. I would take the dist cap off and see if it spins when the motor turns. If not, then the timing belt or something else is wrong. If it does, then the dist may be bad. (it's sold as a Honda Civic in the USA)
SOURCE: 1.5 honda ballade 16v torque values big end and main bearings
This is likely the same engine as the model we call a Civic here in the US so refer to the tables for a Civic on the search
1,005 views
Usually answered in minutes!
Sorry but we need the settings for the flywheel bolt, main bearing and big end bearing
×