1999 Chevrolet Cavalier Logo

Related Topics:

Eric Hollon Posted on Jan 24, 2017

99 chevy caviler where is the bleeding valve for clutch

2 Related Answers

Anonymous

  • 5 Answers
  • Posted on Jan 26, 2009

SOURCE: '99 chevy caviler fires right

If it is fuel injected it will get enough fuel to start but not stay running. I had the same problem with my S10. Turns out the hose that went on to the end of the fuel pump was roted. pull the sending unit and check the hose connections to the pump and the sending unit. If problem presists replace filter first the pump.

Ad

Anonymous

  • 5 Answers
  • Posted on Mar 04, 2010

SOURCE: how do you bleed the clutch on 99 3.8 camaro, bleeder location?

bleed it the same way as brakes and the bleader is on top of hte slave cylinder on the side of the transmission
good luck
jason

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Bleeding clutch on 99 chevy silverado nv3500 5-speed manual

The master cylinder piston may be stuck in due to having no fluid, try putting some pressure into resivour, our prying it out
0helpful
1answer

99 caviler bleeding valve for clutch. Location of it is what I need

Follow the line from the clutch master cylinder down to the slave cylinder. The bleed valve is on the bleed cylinder.
0helpful
1answer

Bleed clutch lines on 99 miata manual clutch

Underneath the vehicle there is a clutch slave cylinder that has a bleed port.
bleeding clutch for slave cylinder replacement
0helpful
2answers

99 Chevy venture how do I use bleeder on fuel

You mean the shrader valve that looks like a tire valve, on the fuel rail? That is not a bleeder, it is a test port to hook up a fuel pressure tester. You do not need to bleed the fuel lines.
0helpful
1answer

Installed motor in 2003 standard caviler, clutch goes to floor does not come back. fluid pissing inside transmission, afraid may have damaged mechanism inside bell housing. does transmission have to be...

Your cltch slave is outside of the bell housing ... it needs to have its line tightened and then refill the clutch master cylinder... bleed the clutch and you should be good.
1helpful
1answer

How do you bleed the clutch on 99 3.8 camaro, bleeder location?

bleed it the same way as brakes and the bleader is on top of hte slave cylinder on the side of the transmission
good luck
jason
0helpful
2answers

Clutch problem

Open bleeder at slave. Push down on pedal and hold. Tighten bleeder and repeat until fluid is present. Then pump up and bleed remainder of air. Requires two people.
Not finding what you are looking for?

236 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...