2002 Honda Odyssey Logo

Related Topics:

Hassan Bailey Posted on Jan 23, 2017

Honda Odyssey 2002 crank position sensor can be changed without motor removal

5 Related Answers

mtous2162

  • 58 Answers
  • Posted on Apr 21, 2009

SOURCE: How to change the cabin filter on 2006 Honda Odyssey?

I will never understand why this service is so expensive at the dealership.
I made a video showing how this is done:   (I would recommend watching the video in HQ and full screen)

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on May 20, 2009

SOURCE: how to change the alternator

go to the link and use the tools provided there for general info on alternator replacement.

Anonymous

  • 2 Answers
  • Posted on Sep 09, 2009

SOURCE: replacing catalytic converter on a 2002 Honda Odyssey

i have 2002 honda odyssey
engine and tcs light come on after driving 10-15 miles with code p0131, p0132,p0136,p0137

please help me fix my car problem

Anonymous

  • 155 Answers
  • Posted on May 22, 2010

SOURCE: how to change plugs on honda odyssey 2005

you will need
8mm
10mm
5/8 spark plug socket
3/8 ratchet
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help

swolfinor

STEVE WOLFINBARGER

  • 504 Answers
  • Posted on May 30, 2010

SOURCE: how to program garage door opener in 2002 honda odyssey

GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the camshaft position sensor located 02 honda odyssey

Are you getting a check engine light? If so, the sensor is rarely the problem. You need to check that the timing chain didn't skip or stretch. If it did (which is a possibility with that Honda motor 2002-2006), it needs to be serviced before driving it. If the timing's off, you can bend the valves and it's over.
0helpful
1answer

What can cause a p0335 code to appear on my 2003 honda odyssey

code p 0335 refers to crankshaft position (CKP) sensor---circuit malfunction=== causes --wiring--CKP sensor ---ECM
at this point because you were in the area doing repairs to the power steering pump , it is possible that you have disconnected the wires to the CKP
check that or replace the CKP
1helpful
1answer

2000 odyssey CKP problem code P0335. I replace the crank seal and this code show up after that. then I open again to replace the sensor and code still there. What I can do? thanks

code p 0335 refers to crankshaft position sensor (CKP)---circuit malfunction===causes ---wiring---CKP sensor ---ECM
the wires are a good place to start and check for damaged insulation , broken wires or bad harness connections
next there is an air gap setting between the sensor and the exciter (segmented bars on a ring) on the crankshaft check that is correct ---dimension available from the workshop manual
0helpful
1answer

2001 honda odyssey camshaft position replacement

it unplugs
the take out screw
then remove it by hand
that?

0helpful
1answer

2002 honda odyssey van stopped running while driving

Run fault codes and check for cam/ crank position sensor. Check the cam timing belt as it may have broken
0helpful
1answer
0helpful
1answer

Location and replacement of crank sensor on honda odyssey 1999

crank sensor is located to the upper right hand side of the crank pulley. you have to remove the pulley to access this. you can test it without removing the pulley though.
1helpful
1answer

I am trying to remove the throttle body from a 2002 honda odyssey... I have removed EVERYTHING but the body just won't budge...since it is aluminum, I don't want to pound on it... any suggestions?

you will probably need to hit it with a rubber mallet and be very careful not to hurt the tp sensor it is non removable from the throttle body
3helpful
1answer

2002 honda crv air filter change

Hi!

Can you specify if you are referring to the engine intake air filter or the cabin air filter?
If you are referencing the cabin air filter, the attached youtube video should help.

I originally created the video for the Odyssey, but found out after looking at my dad's CRV that it is essentially the same procedure as the Odyssey, and have also noticed that the same stands true for most Honda vehicles built between 2005 and 2009.

Happy motoring!

0helpful
1answer

Replacing the timing belt on a 2002 Honda Odyssey

you need a haynes repair manual . it save you time. it shows you step by step . what to remove to get to timing belt or chain . show you photos how to set timing chain cam and crank timing marks.
Not finding what you are looking for?

861 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...