SOURCE: where is the bank 1 sensor 1 o2 sensor located in
The bank has to do with which side of the engine. The 'Sensor 1' indicates that it is upstream of the catalytic converter.
Heated Oxygen Sensor
Removal & Installation
Heated Oxygen Sensor (Front) (2.4L)
Heated Oxygen Sensor (Rear) (2.4L)
Heated Oxygen Sensor (Bank 1/Sensor 1) (3.3L)
Heated Oxygen Sensor (Bank 1/Sensor 2) (3.3L)
Heated Oxygen Sensor (Bank 2/Sensor 1) (3.3L)
Heated Oxygen Sensor (Bank 2/Sensor 2) (3.3L)
SOURCE: i need to know how
If you have a dip stick, then warm up the trans oil to at
least 180 degrees & keep adding until it is at the proper level
SOURCE: atos 1.1 torque settings
You can call a parts store, have them look up the part first for pricing, and ask if there are required torque setting for the area. Sometimes the owners manual will have some specs
SOURCE: hyundai atos 2005 driving so slowly
have you had the OBD codes read at a garage this may help to point you in the right direction,sounds like a sensor(s)
Testimonial: "thanx so much. I will take my car for obd tests. will give u a feedback."
Take it back to the shop that did the overhaul - they can check the pressure with another gauge - if this is not the problem they can follow through with more checks to rectify the problem. You should have some comeback on warranty from the shop?
154 views
Usually answered in minutes!
×