SOURCE: 1997 ford explorer AWD front drive shaft problem...
Try getting a free quote from several reputable shops before deciding to throw down your money on something your not certain of. Im not dissing your mechanic by any means, it doesnt cost anything to get another opinion or two or three....Its your money!
SOURCE: front hub is stuck to knuckle.
spray with penetrating oil and let sit. hit with a big hammer. if it still will not come loose remove knuckle and use a press to remove bearing.
SOURCE: how to remove cv drive shaft on 03 kia spectra
jack up the vehicle on the frame or on the body lip not on the front suspension take the lower ball joint loose and remove the axle nut and push the axle out of the knuckle and tie the knuckle up out of the way then you can take a pry bar and pry the axle out of the transmission being careful not to damage the seal. then reinstall new axle in reverse order
Testimonial: "i have done all that but can't get it to break free of trans any ideas i have tried prying and yanking thanks for your help"
SOURCE: front drive shaft/transfer case removal 03 chevy trailblazer 4wd
Sounds like you got it. They are heavy and ocward (spelling?). As for the front drive shaft take the bolts out and give it a couple of wacks with a dead blow hammer then slide it out. Maybe a few days before hand give it a good spray down with wd40 or like product. Also when you get to the last bolt for the t-case to trans loosen it half way then put a drain bucket under it and seperate it a little and let the trans fluid drain some, or you will be wearing it.
SOURCE: 97 ford explorer awd bad right front cv joint
No, never drive without cv shafts, i tried it and my wheel bearing blew apart and I lost a wheel after driving for 10 miles
1,192 views
Usually answered in minutes!
×