SOURCE: HOW DO I REPLACE BEARING IN AC CLUTCH IN A 2002 TRAIL BLAZER
you can buy a puller kit for the AC clutch for about $35.00 the bearing is about $25.00 you might be able to do it without removing it from the engine saving your freon. http://www.tooltopia.com/index.asp?PageAction=VIEWPROD&ProdID=7741
Belt tensioners just unscrew.They are also inexpensive
SOURCE: My 1997 Chevy Blazer doesn't want to run when the
It kills the engine when the A/C is turned on? Is the compressor locked up?
SOURCE: ac clutch replacement on a 2002 chevrolet blazer
if the "hold-in" coil for the compressor shaft is good, take a "butterfly" impact wrench (due to space limitations), then remove shaft nut and very carefully put nut on shaft loose and rap the end of the shaft with light forward pressure applied to clutch, it sometimes works this way, otherwise you'll need to rent an A/C clutch removal tool at a parts store, but remember be very careful how hard you rap shaft and do it with something like hard plastic/wood
SOURCE: do i spin left or right to get the fan clutch
its always the oposite way the motor turns when running.
SOURCE: Will a 2001 and a 2002 slave cylinder and clutch
You wont have any problems changing them. I think 99 to 03 are all the same.
195 views
Usually answered in minutes!
×