2002 Daewoo Lanos Logo

Related Topics:

A
Arthur Kelly Posted on Jan 01, 2017

Remove & replace front drive bearings on Daewoo lanos 2002 model

5 Related Answers

Anonymous

  • 6 Answers
  • Posted on Jul 16, 2008

SOURCE: reset passcode for radio of 2002 daewoo ,lanos

MINE CAME ON A SMALL METAL TAG ON THE SPARE KEY

Ad
A

Anonymous

  • Posted on Oct 18, 2008

SOURCE: daewoo lanos

your brakes are keeping i on the dum try a puller and a hammer

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Aug 24, 2009

SOURCE: 2001 daewoo lanos front passenger bearing

Remove the wheel ,then track end ,brake caliper support ,the pinch bolt that holds housing to the strut ,lower track control arm swivel.pull off and place on bench .knock the centre hub piece out and on the inside of the housing is a big circlip that holds it in .Then take to a garage and have the old one pressed out and the new one pressed in.stripping shouldnt take more than 35mins ,visit to garage for the pressing?? allow 2 days --- refitting max half hour

Anonymous

  • 7 Answers
  • Posted on Jan 13, 2010

SOURCE: How to replace front wheel bearings on 2000 Daewoo Lanos

they come as a whole assembly hub and all

honeymokey

honeymokey

  • 3113 Answers
  • Posted on Dec 29, 2010

SOURCE: I need to change my

Press in bearing.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Remove & Replace Front Drive Bearings Daewoo 2002 model

what are 'front drive bearings" ?
Do you mean the ones in the front wheel hubs that drive-shafts run inside?
0helpful
1answer

Clutch

Well, if you have a lift and the ability to remove a heavy trans, it is not too hard. Usually not a home job.
Also resurface the flywheel and replace release and pilot bearings.
0helpful
1answer
4helpful
1answer

Severe bearing noise from front wheel bearing/cv joint area.Cv joint still lubricated,I tend to think axle support bearing is dry & on the way out,but only assuming.How does front wheel bearing come out of...

you have to replace bearing and hub as a unit.you have to remove remove brakes and caliper rotor set them aside dont disconnect brake line. get a piece of clothes rack wire to hold brake caliper .do not let it hang by brake hose. you got to remove hub nut. best way to do that is loosen it a litttle while tire still on weight of car keep wheel from turning .
0helpful
1answer

2001 daewoo lanos front passenger bearing

Remove the wheel ,then track end ,brake caliper support ,the pinch bolt that holds housing to the strut ,lower track control arm swivel.pull off and place on bench .knock the centre hub piece out and on the inside of the housing is a big circlip that holds it in .Then take to a garage and have the old one pressed out and the new one pressed in.stripping shouldnt take more than 35mins ,visit to garage for the pressing?? allow 2 days --- refitting max half hour
0helpful
1answer

How do I know if my front wheel bearings are going out in my car

Jack up the car (SAFELY) so one wheel is just clear of the ground.

Grip the wheel with both hands and see if there is any movement when you "pull / push" the wheel.

If there IS movement ..... you need new bearings.

Good luck.
0helpful
1answer
0helpful
1answer

Daewoo lanos

your brakes are keeping i on the dum try a puller and a hammer
Not finding what you are looking for?

141 views

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...