Torque setting for pressure pate to flywheel for Isuzu 280 bakkie

1. Flywheel: The torque specification for the flywheel bolts is typically around 80-85 lb-ft (108-115 Nm). It's crucial to tighten the bolts evenly in a crisscross pattern to ensure proper seating of the flywheel.
2. Pressure Plate: The torque specification for the pressure plate bolts is usually in the range of 14-20 lb-ft (19-27 Nm). As with the flywheel bolts, it's essential to tighten the pressure plate bolts evenly and in a crisscross pattern to avoid warping or uneven pressure distribution.

It's important to consult the specific repair manual for your vehicle to ensure accurate torque specifications for your particular model and year, as torque values can vary between different engine configurations and manufacturers' recommendations. If you don't have access to the manual, you may want to consider contacting a reputable mechanic or the manufacturer for assistance.

See the link

https://www.google.com/search?q=1992+Isuzu+amigo+2.6l+flywheel+pressure+plate+torque

..

Torque Specification - National Truck Spares ' Parts

www.nationaltruckspares.com.au/Parts.aspx?ProductTypeID=8...

1073, 4BC2 tq, Isuzu, Torque Specification, KT26 TLD57 NKR57 NPR57 ... 1075, 4HF1Tq, Isuzu, Torque Specification, NKR66 NPR66, 92 - 03, 4HF1, 4334

Small Block Chevrolet V8 Engine Specs ' Torque Specs ...

boxwrench.net/specs/chevy_sb.htm

Flywheel (Clutch). Thread Locker, 60 ft-lbs. Clutch Pressure Plate, Thread Locker, 35 ft-lbs. Centerbolt. (Harmonic Damper). Engine Oil, 60 ft-lbs. Bellhousin

If this was in a basic workshop the flywheel would be as tight as you can reasonably pull with a 1/2 inch breaker bar, clutch pressure plate bolts with a 1/2 inch ratchet. Loctite the bolts. Tighten evenly across the bolts in sequence. If you really want to know hopefully someone will have a manual and sign in.

alldata.com

log in read?

Isuzu Workshop Manuals

Isuzu Workshop Manuals

I know some flywheel torque Mitsubishi and other tools, hope that can help you! good luck!

The flywheel bolts call for 52 lb-ft, the pressure plate calls for 13 lb-ft. Tighten in a diagonal pattern, one or two times at a time until seated then apply the final torque.
I have attached an image for reference. Goodluck

normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.