Where is voltage regulator on 1994 Nissan sentra 1.6
SOURCE: the cilynder #1 and spark
Did you change the spark plug?? Your car (1993) has a distibutor assy, which means it has ignition wires for each plug. How are your wires??cap?? rotor?? Have you ever done ignition tune up?? If the answer is yes and you have already installed new injector and pressure regulator (althoug it still could be a injection issue/ECM or computer, because ECM is what drives the injectors. If the ECM or wiring to #1 injector has an issue, the injector will not fire off and put gas into the cylinder, resulting in a misfire.) Remove #1 injector connector and check to see if you have power/12V on one side of the connector. If you have 12V there, than check the other wire for continuity to the ECM. You will need wiring diagram to find the right wire color at the ECM. That other wire goes into the ECM to the driver which opens and closes the injector depending on your demands as far as gas pedal input. That driver may be bad, causing the injector not to shoot gasoline. Than I would be looking into a engine issue, such as burned valve, or head gasket problem (coolant getting into #1 cylinder, flooding your spark plug). Tough to diagnose over the computer and not looking at it my self. Let me know what you find.
SOURCE: 1994 nissan sentra shifting hard
change fluid in trans add lucas for trannys let me know if theres metal in the pan or if you have trouble tell fixya bout me ok
SOURCE: i need to install a headlight bulb for a 1994
the easiest way to replace a headlight bulb is to drive to an autozone store where they will install for free as long as you purchase the bulb free.
SOURCE: 2004 Sentra: How you change transmission Fluid in Nissan Sentra...
good day Sir, try this link i hope this will help you.
nissan sentra2003
149 views
Usually answered in minutes!
×