See if this link might help you out.
2003 Nissan altima radio code Google Search
You will have to ask Nissan dealer. I had same problem. Each radio has different number.
Nissan radio codes from this link: Car radio codes in Uxbridge London Gumtree
SOURCE: 2003 nissan altima 2.5s transmission rough shift
Probably sensors! I have already replaced the crankshaft positioning sensor once, nissan replaced it once under recall and now it is bad again! Plus my speed sensor is bad too! Go to any part store and get diagnostic test ran, it will tell what sensors are bad.
SOURCE: How do I reset computer on 2003 Nissan Altima?
RADIO CODES KEPT AT DEALERSHIP ITS A 5 DIGIT CODE CALL THEM WITH YOUR VIN AND NAME THEY SHOULD BE ABLE TO TELL YOU THE CODE? THE COMPUTER ITSELF DOSENT MATTER IT RESETS ITSELF IF NO PROBLEMS FOUND ON REBOOT
SOURCE: how do i remove the factory radio to install a new
There are several pages on removing the correct clusters. Here is a link with an inexpensive service manual with pictures and step by step instructions. 2003 Altima Service Manual
SOURCE: 2003 Nissan Altima radio still works but the clock/radio station display went blank...HELP
Just fixed this myself today. There is a surface mount component (resistor I believe) that has come off inside the radio. It was labelled 180 on my radio. It is on the circuit board actually inside the radio, not the dispaly button panel, on the left side behind the volume know. I soldered it back on and now the display works again.
577 views
Usually answered in minutes!
×