SOURCE: rear hub nut on a2003 hyundai elantra
Very wild guess. I replaced the bearings in my 2003, and was looking in my tool box. I came across a 1 1/4" socket that I purchased around the same time, but I realize that it should be the metric equivalent of this, so it probably did not fit perfectly. Metric conversion would be 31.75 mm.
SOURCE: oil change procedure on a 2005 Hyundai elantra
it is very easy to change the oil put the car on ramps secure the back end look for the drain plug underneath the engine make sure you have the right size wrench and when you remove the plug also check the gasket on the plug to make sure it is not cracked you will also need an oil filter wrench and my other suggestion to you is to go to autozone to see if they have a Haynes repair manual for your car and if they don't see if they can order you one in the mean time they can also print you off a diagram of how to change the oil in you car safely
SOURCE: how to replace the battery on a 2005 hyundai
If you purchase a new battery at an autoparts store, like autozone or advance, they will install the new battery for you. Hope this helped and best wishes.
SOURCE: I have a 1998 hyundai elantra how do I replace my
If the flex pipe is bad, there is no way of fixing it right, you will need to figure out what size of pipe you need, and go and buy a new section from a autoparts store, and have it welded on really good.
242 views
Usually answered in minutes!
×