I have a 1996 sl320 last night i was making a right trun and the ets & abs dash lights came on my brake lights are working ok on the way home i had no cruz control and the lights never went out

dashboard brake light flashing randomly - Forums.focaljet.com

forums.focaljet.com/.../662231-dashboard-brake-light-flashing-randoml...

May 14, 2012 - 12 posts
Car run great the only issue is the dashboard brake light is flashing randomly. ...Finally, the instrument cluster is hardwired to the ABS module, ... Also,i change the parking brake switch and the light goes on & off less frequent.

what does ABS flashing light mean at the dashboard of my 1996 ...

https://answers.yahoo.com/question/index?qid...

May 3, 2009 - What does ABS flashing light mean at the dashboard of my 1996 ... just hard enough to skid a tiny but, then back off a hair to stop skidding.

ABS Brakes Troubleshooting - How to Troubleshoot Anti ...

www.popularmechanics.com/cars/how-to/a461/2265091/

First, check to see if your ABS and your TCS fuses are good. A lot of times, if both lights come on, it senses a failure in the braking system. Your vehicle will disable the abs if it finds a problem in the braking system, hence the red brake light/hand brake light coming on in the dash. Get a code scanner that also reads the abs module. You could have a bad wheel sensor, which is tied to your TCS and your ABS system. Either that, or you ABS module could be bad.

hi i would check the abs module its located on the abs pump it controls the speedometer and can also bring lights on the dash eg abs &the brake warning light

low voltage will cause these symptoms. get alternator checked and battery checked

Hi. Thanks for your question. For issues related to brake warning lights on dash illuminated for Mercedes C180, 1996 saloon. You can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

I will assume your familiar with most lights
you get on your dash. They have been there for 30 years

The ABS is your braking systems electrical part,
that has issues or problems. I will assume you know that
as well

Also the brake lights while electrical is not ABS
related, different problem to work on.

Both these issues need to be diagnosed & repaired

You can not use the vehicle with no brake lights &
the abs will need professional help to resolve,
such as a repair shop with test equipment

You can try unpluging the fuse under the hood for the ABS but your brake light and ABS light on the dash will come on.I'm in NH and it would fail the saftey inspection if either of thoughs lights were on during the inspection.See if this helps your problem but you most likely have a wheel sensor going bad in the ABS system.

decoder

Have your brake pads and rotors checked if you have worn pads this will activate the ABS Antilock Braking System light. The ETS Electronic Traction System uses this ABS to prevent skidding if the tires should lose traction.

You must have ripped the wires off underneath your truck, and you probably don't have brake lights anymore either. Better get somebody to repair it as soon as you can.