At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, you'll will need to remove wiper motor crouling to get the wiper motor. There will be two rods attached to the wiper motor. Now, this arms operate the wipers on your auto wind shield. One of the arms have came loose from it ball joint. GB....stewbison
this is normally caused by a bad wiper motor or binding of the wiper gears and linkage arms.
check to see if the linkage arms are tight and not loose. also try and lube up the pivot points.
another thing to check is to make sure you have 12 volts to the heater.
eithor the wiper is off the gear or your wiper motor went out check see if the wiper arm is not on the spindle or if spindle the arm connects to is tryin to move or not moving at all
The arm is stripped onto the stud its pressed into which is call a wiper transmission. That part mounts to eack ww blade then to the wiper motor. You need a new transmission and maybe a new wiper are as well
×