Changed master cylinder & put brand new slave cylinder on car,,bled any air out of system,continuious rock hard pedal now.thinking clutch throwout arm is broken or bent maybe ?.
SOURCE: 2002 Hyundai Accent won't go into gear.
Probably the arm that holds the rtelease bearing in the bell housing has slipped out of place. Get someone to depress the clutch while you check the arm is not loose. If the cylinders are working then its most likely the arm is disconected. If you are lucky you may get it put back in place by looking through the inspection hole but most likely you will have to seperate the engine and gearbox. Sorry I havent better news for you.
SOURCE: 2001. Why won't clutch pedal depress?
did you check the condition of the clutch, throw out bearing, clutch fork. any of these can cause this.
SOURCE: how do I fix my clutch pedal
Sounds like the clutch release bearing (throwout bearing) is seized in place.
427 views
Usually answered in minutes!
×