At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I don't have a manual for your model, but did find a YouTube video for a 2008 Dodge Avenger showing the location of a couple of actuators on the HVAC box. It may not be exactly the same for your car, but it should give you an idea of what you're looking for.
There are a few more videos for Dodges, but mostly for Rams (pickups). 2008 dodge avenger blend air actuator location
Dennis, You have 2, open glove box, bend tabs on glove box and pull down to over open glove box, actuators are on ductwork both sides. link to video showing how.
I would pull off the blend door actuator and swap it out with a new one. Or another option is to swap it out with one of the other actuators. The blend door actuator is interchangeable with the actuators for the mode-air doors and the recirculation-air door.
Disconnect and isolate the negative battery cable.
If equipped, remove the silencer from below the driver side of the instrument panel.
Disconnect the wire harness connector from the blend door actuator located on the driver side of the air distribution housing.
Remove the two screws that secure the blend door actuator to the actuator mounting bracket and remove the actuator
×