At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I got some problems with my car, can you help me please?
Hi there, i have a 1995 XJ6 sourvreign in a great condition, but it trunk button doesnt work and the compressor doesnt work too, can u please help me with this problem i would thank you so much
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if the trunk opens by the internal switch it will be the button gone down common problem easy to fix just remove trunk lid liner exterior finisher you can test by latching trunk latch with screwdriver and shorting out the two wires in the connector going to the trunk wiring from the button also the wiring is prone to breaking around the trunk hinge
The valet button is in the center console. You can also use the manual key (the black one) in the back key holder (located in the XJ6 label on the trunk), that will overide the electrical lock and you can open manually.
My suggestion would be to open your glove compartment and pushing the valet button to release the locking mechanism for your trunk which would cause everything else not to work.
Have you tried using the actual key? If not, try inserting the key in the trunk hole while holding it to the open position, rock the trunk up and down. You may have a strap or something caught in the latch.
Had similar problem when keys accidently locked in trunk.Solved by drilling 1 inch circular cutout (series of small drill holes) behind number plate above lock. Lock operating bar then visible. Lock released using long nosed plyers. Note.. release button on lid failed to operate as by coincidence wiring loom failed where it passes trunk hinge ! Hole re-sealed and number plate replaced. I had vallet key but this dosnt open trunk. Hope this helps Pete
We're working on our friends 95 Jag. He took it to a local shop and the gomer calling himself a mechanic started pushing buttons on the console. He pushed the top down button while the top was still connected. The rear windows thought the top was supposed to go down so they started rolling down. They stopped them about halfway down, but couldn't get them back up. But that isn't the problem. Now, we can't get the trunk open. The problem? The trunk is not the original. It came from a junkyard and he has never had a key. So the remote only works on the doors. How in the world do we get that trunk open. Our only thought is to go through the back seat, and that looks like way too much work. Any ideas?
I f it is like the XJR, the cig lighter is electrically switched and will not work. Find the hot point and and ground in the passenger side heelboard. The ground is two wires together scewed to the body an the hot point was a bolt attacted to a large wire and covered with a black rubber boot.
×