Posted on Jul 20, 2009

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Fuse of break lights pop when I turn lights on ,

Fuse of break lights pop when I turn lights on , and from the stop swuitch there are five wires purple/ yellow , purpple/whi. blk/orang,whi/tan,gray/red, all these wires get hot and burn fuse on 2002 town&country

2 Answers

Ned C Cook

Chrysler Master 3,433 Answers
Posted on Jul 20, 2009

Ned C Cook

Chrysler Master

Joined: May 04, 2009

Answers

3433

Questions

Helped

1438034

Points

9966

And they are all harnessed to the turn signal control? You have a dead short in the turn, flash, brake system. Work each one seperately until you isoolate the shorted circuit. Do not use the brake. put in a new fuse and turn on the left turn, wait, If fuse didn't blow, turn on thethe right turn signal, wait, if the fuse didn't blow, turn on your 4 way flashers and wait. If fuse has not blown, get the wife and have her step on the brake while you watch the third brake light and the othe two. That you are watching for is one of the three being dimmer than the others. Here is a tip, Remove the brake light switch and operate it manuallt so you cand detect whether the swith is causing yor short or not.Ipping the fuse ampereage will create a serious fire condition, so do not exceed the original size fuse. Are you towing with this vehicle? If so, what are you towing?

Anonymous

Contributor 4 Answers
Posted on Jul 20, 2009

Anonymous

Contributor

Joined: Jul 20, 2009

Answers

Questions

Helped

1399

Points

Did you hook up trailer lights

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1helpful

1answer

I have a 2003 envoy XL, I have replaced. the break switch & the turn signal switch, & 1 curcit board & I have power to the inside fuse box, and tail lights&turn signals work. but no brakes?

Power to the brake lights flows from Fuse 12 in the underhood fuse box to the brake light switch. Check for power at the switch on the orange wire. Power leaves the brake light switch on the white wire and heads rear fuse box under the left rear seat. Power goes to fuse 34 Vehicle stop fuse 15A. From there it goes to the left and right stop bulb connectors on the light blue wires. If you don't have power on the light blue wires, you've got a bad fuse or an open somwhere. Two fuses in the stop light cirucit.

Read full answer

Sep 14, 2019 • Cars & Trucks

0answers

Having issue, no brake lights. And my stop/haz fuse pops when I touch the break. I have replaced all the obvious. Looked under dash seen LT blue wire from c/c was fried. could that be the issue?

Read full answer

Be the first to answer Nov 01, 2015 • Cars & Trucks

0helpful

1answer

No break lights , replaced the break pedal switch , the tail light circuit boards and all bulbs , still no lights . and stop/haz fuse pops immediately when I youch the break ..... at a loss

You have a dead short and it could be any where from the front to the back of the car. It could be where a wire has a rubbed place in it or in the tail light assembly itself. According to what kind of vehicle it is it could be the multifunction switch. That is the most common cause

Read full answer

Nov 01, 2015 • Cars & Trucks

0helpful

1answer

2009 chevy cobalt no brake lights new fuse nswitch blinkers n tail lights work

Replace the turn signal swuitch..

Read full answer

Dec 23, 2014 • 2009 Chevrolet Cobalt

0helpful

1answer

HELP!!!! Toyota paseo 93. When I got the used car the dash cluster lights/ tail lights/ lic plate light didn't work. I checked and changed the fuses in car/ under hood. I checked and changed the tail...

Those are your marker lights. They come on when you turn your lights on halfway. I would suspect your light switch was overheating and melted the harness behind it and shorted 2 wires.

Read full answer

Oct 15, 2013 • Cars & Trucks

0answers

2005 suburban , the trailer harness wiring behind the plug in has power for the break and right turn but has no power for riding lights or left turn ?

Read full answer

Be the first to answer Sep 04, 2012 • 2005 Chevrolet Suburban

2helpful

1answer

Why does fuse # 25 keep blowing out on my Chrysler pacifica 2004

Fuses pop because it is breaking the direct line of voltage that is being selected...anotherwords...instead of when you turn on your radio and the incorrect amount of voltage that is being sent to the radio frys it, the fuse breaks/pops to stop the flow of voltage to the radio.

The problem seems to either be a bad relay or wires are touching somewhere in that system.

Read full answer

Nov 20, 2011 • 2004 Chrysler Pacifica

0helpful

1answer

I have a 2004 jeep liberty my turning signal fuse keeps burning out, but my hazard lights work. Once my fuse burns out, I have no left or right turning signals.

a wire has to be shorting out the fuse, check all wires and make sure no metal is showing or frayed. If so wrap the wire that is showing with electrical tape to make sure no metal is touching any other wire, this would cause the short, and would pop the fuse. You may want to try a fuse with a higher breaking point as well, i.e. a 20 amp fuse.

Read full answer

May 05, 2011 • Jeep Liberty Cars & Trucks

0helpful

2answers

2005 ford five hundred , passenger mirror fried, electical smell

Sometimes your car insurance will pay for this as a fire claim. You do not have to fix it yourself. My Olds lit up the dash, the insurance covered it and a Rental.

As for the 4 fuses there may be a fusible link to power these. Also since most are only required when the engine is running, they may be dead until the ignition is turned on.

Read full answer

Aug 14, 2009 • 2005 Ford Five Hundred

0helpful

1answer

No dash lights and no tail lights

Check for faulty wires at the fuse block, had one fall off from the block itself from the rear, or it could be a wire break somewhere along the way.

Stop Lights and Blinkers are independant fuse.

Tail lights are on there own fuse and could be a wire break in the rear or removing the bulb and using a metre check for signal at bulb socket where trouble is, Check for disolored connections, Green in color or simular, could be a bad connection which in turn is not letting the curent to other side, Causing a short and loss of power to all remaining lights in curcuit.

Read full answer

Sep 15, 2008 • 1999 Chrysler Town & Country

Not finding what you are looking for?

View Most Popular

2007 Town & Country LX New Cars

Cars & Trucks

I have a 2003 envoy XL, I have replaced. the break switch & the turn signal switch, & 1 curcit board & I have power to the inside fuse box, and tail lights&turn signals work. but no brakes?

Cars & Trucks

164 views

Ask a Question

Usually answered in minutes!

Have a manual for 2007 Chrysler Town & Country LX New Cars? Or just drag it here!

Related Topics:

Trustworthy Expert Solutions

Fuse of break lights pop when I turn lights on ,

2 Answers

Ned C Cook

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a 2003 envoy XL, I have replaced. the break switch & the turn signal switch, & 1 curcit board & I have power to the inside fuse box, and tail lights&turn signals work. but no brakes?

Having issue, no brake lights. And my stop/haz fuse pops when I touch the break. I have replaced all the obvious. Looked under dash seen LT blue wire from c/c was fried. could that be the issue?

No break lights , replaced the break pedal switch , the tail light circuit boards and all bulbs , still no lights . and stop/haz fuse pops immediately when I youch the break ..... at a loss

2009 chevy cobalt no brake lights new fuse nswitch blinkers n tail lights work

HELP!!!! Toyota paseo 93. When I got the used car the dash cluster lights/ tail lights/ lic plate light didn't work. I checked and changed the fuses in car/ under hood. I checked and changed the tail...

2005 suburban , the trailer harness wiring behind the plug in has power for the break and right turn but has no power for riding lights or left turn ?

Why does fuse # 25 keep blowing out on my Chrysler pacifica 2004

I have a 2004 jeep liberty my turning signal fuse keeps burning out, but my hazard lights work. Once my fuse burns out, I have no left or right turning signals.

2005 ford five hundred , passenger mirror fried, electical smell

No dash lights and no tail lights

Not finding what you are looking for?

2007 Town & Country LX New Cars

I have a 2003 envoy XL, I have replaced. the break switch & the turn signal switch, & 1 curcit board & I have power to the inside fuse box, and tail lights&turn signals work. but no brakes?

Ask a Question

Check Out the Latest Top Trucks Report!

Top Chrysler Experts

ZJ Limited

Thomas Perkins

john h

Are you a Chrysler Expert? Answer questions, earn points and help others

Manuals & User Guides

. 2007 Town & Country LX New Cars...

Related Topics:

Trustworthy Expert Solutions

Fuse of break lights pop when I turn lights on ,

2 Answers

Ned C Cook

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a 2003 envoy XL, I have replaced. the break switch & the turn signal switch, & 1 curcit board & I have power to the inside fuse box, and tail lights&turn signals work. but no brakes?

Having issue, no brake lights. And my stop/haz fuse pops when I touch the break. I have replaced all the obvious. Looked under dash seen LT blue wire from c/c was fried. could that be the issue?

No break lights , replaced the break pedal switch , the tail light circuit boards and all bulbs , still no lights . and stop/haz fuse pops immediately when I youch the break ..... at a loss

2009 chevy cobalt no brake lights new fuse nswitch blinkers n tail lights work

HELP!!!! Toyota paseo 93. When I got the used car the dash cluster lights/ tail lights/ lic plate light didn't work. I checked and changed the fuses in car/ under hood. I checked and changed the tail...

2005 suburban , the trailer harness wiring behind the plug in has power for the break and right turn but has no power for riding lights or left turn ?

Why does fuse # 25 keep blowing out on my Chrysler pacifica 2004

I have a 2004 jeep liberty my turning signal fuse keeps burning out, but my hazard lights work. Once my fuse burns out, I have no left or right turning signals.

2005 ford five hundred , passenger mirror fried, electical smell

No dash lights and no tail lights

Not finding what you are looking for?

2007 Town & Country LX New Cars

I have a 2003 envoy XL, I have replaced. the break switch & the turn signal switch, & 1 curcit board & I have power to the inside fuse box, and tail lights&turn signals work. but no brakes?

Related Topics

Ask a Question

Popular Questions

2001 chrysler town and country

My battery light comes on and steering wheel locks

Chrysler town and country wiring diagram

Where is the factory amp

What is the error code p0455 on Chrysler Town and

Check Out the Latest Top Trucks Report!

Top Chrysler Experts

ZJ Limited

Thomas Perkins

john h

Are you a Chrysler Expert? Answer questions, earn points and help others

Manuals & User Guides

. 2007 Town & Country LX New Cars...