I need 2000 f250 triton v8 5.4 vaccume Diagram

Here is a link to a 2005 Gas 5.4. IT should be exact or very similar.
http://www.ford-trucks.com/forums/905288-no-start-issue-2005-f250-5-4l-2.html

Many manufacturers place a routing sticker somewhere in the engine compartment - did you look around at all for one?

Regarding the 2000 6.8 Triton. Following this diagram I pulled out the plug in cylinder 3 since code says mis fire on #3, the motor I'm working on is from a 2000 f350 with 115k on it, when I pulled out the plug theres a thin piece of paper came out with the plug its about 3/4 x 3/4 inches long stamped on it says cyl #5, the unusual type of paper feels like it's composed of Mica and something else which mics' blocks arcing so I'm thinking this little mica paper is from factory and this cylinder is actually number 5 and not 3 as diagram indicates. Best to do some research before following this since plugs and coils a real pita in these. Please advise if anyone else has experience a problem with this or if maybe this isn't for the 6.8 thanks

Cylinder #2 will be the second cylinder from the front on the passenger side, and here is a diagram to help assist you.

You need to specify that if the diagram engine or that. Thanks

Disconnect heater hoses from heater tube on motor and clamp a hose from on tube to the other.

check your vaccum hoses for leaks.

Review in autozone.com (free register), there you can find 31 Wiring Diagrams about F250.



Good luck (remember rated this help).

sure can everything is the same

go to autozone.com and click on repair guide, there hsould be instructions and a diagram there.