Need engine torque settings for nissan sentra 1.6 16 valve dohc 1997 model

Question edited for clarity and add maker.
Question moved from Computers to model category.

There are some images and a video, but normally you use a socket set with lots of universal joints. Or lift the engine, remove the mounts, then drop the engine and lift the body.

https://www.google.com/search?q=2007+nissan+frontier+4.0+torque+converter+bolts

..

you need a better mechanic that traces ALL of the possibilities of each code, not just read the code and trow in a part hoping that it's fixed ~ it can be wiring as well, not just plug in a new part as mentioned on the 2nd trouble code to the vehicle speed sensor

P0744 Torque Converter Clutch Circuit Intermittent


P0722 Output Speed Sensor No Signal

the first of the 2 looks to be more intensive to trace and find out the problem & the 0722 is the easier job for an intermediate mechanic to trace the wiring for continuity

for the head or what , be a little more specific on your question everything gets torqued on a motor

Here's a link your sensor. http://www.autozone.com/autozone/parts/Cardone-Reman-Mass-Air-Flow-Sensor/1996-Nissan-Datsun-Sentra/_/N-j5ed5Z9gsmv?itemIdentifier=571492_0_0_

SR = engine code
20 = 2.0 liters
Nissan motor made by "bullet", very high performance race engine, some producing over 1500 hp!!!!! Worth about $8500 (thats dollars) here is a sr block:
The Nissan SR engine is a 1.6 L, 1.8 L, or 2.0 L, straight-44-stroke internal combustion gasoline engine manufactured by Nissan Motors. It features an aluminum head and aluminum block with steel sleeves in selected models and features a DOHC 4-valve design, with variable valve timing on select models. The engine was used in many small to medium Nissan vehicles, including high-performance turbocharged variants. It was designed by Nissan as a replacement for the earlier CA series of engines.

The Nissan SR20DE engine was used in over 15 Nissan models. It first appeared in October 1989, and over time it was gradually phased out with the introduction of the QR (low-emissions) engine family. The SR20DE carried nominal power ratings between 130 to 169 Horsepower (96 to 126 kW) from the factory.
The breakdown of the engine code is as follows:

• SR - Engine Code
• 20 - 2.0 Litres
• D - Dual Overhead Cam
• E - Multi-port Fuel Injection

This engine has the following specifications (SAE, 1991)
The Specs Type: Water cooled, 4 cycle in-line 4 cylinder Combustion Chamber: Cross flow, pentroof type Valve mechanism: DOHC, 4 valves per cylinder, chain drive Displacement: 1998cc Bore x Stroke: 86.0 x 86.0mm Bore Pitch: 97.0mm Block Height: 211.3mm Compression ratio: Crankshaft journal diameter: 55.0mm Crankpin diameter: 48.0mm Con rod length: 136.3mm Valve diameters: Intake: 34.0mm, Exhaust: 30.0mm Dimensions: 685 x 610 x 615mm Maximum power: 140 hp-169 hp at 6400 rpm (SAE net) Maximum torque: 132 lb·ft at 4800 rpm (SAE net) It was used in the following vehicles:
Model
180SX 200SX SE-R Almera Avenir Bluebird Liberty Infiniti G20 NX2000 Prairie Joy Presea Primera Pulsar R'nessa Rasheen Sentra Serena Silvia Wingroad

Guys what is the torque specs for nissan sentra 1995 model 16v twin cam caburatter

1997 Nissan Maxima 3.0 liter DOHC V-6 (VQ30DE)



Hope this helps (remmeber to rate and comment this).

Nissan QR 2.5 engine produces a torque of 180 ft·lbf (244 N·m) of torque at 4000 rpm .

email me ill send you it via email cant post here too bigg!!

hi.im a mechanic from the philippines.the torque of all your cylinder head for your nissan sentra 1997 is 60 nm.apply 30 nm of torque first on all the cylinderhead bolts then torque it agian directly to 60 nm. i also drive and repair nissan cars.