1992 Oldsmobile Cutlass Ciera Logo

Related Topics:

92 cutlass ciera sl 3.3l .starter enable relay location. Supposidly in the dash somewhere....on the wiring diagram its between the ignition and neutral safety switch...anyone know the exact location?

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on May 14, 2009

SOURCE: power window wire diagram driver side 92 ciera cutlass

check cut wire at that door in rubber connection between body and door

Ad

jakcars

  • 304 Answers
  • Posted on May 23, 2009

SOURCE: how do i install a ignition model into a 92 Cutlass Ciera

On v-6 it is in the front, tight working area. unplug wiring, remove spark plug wires(mark them for proper order for assembly) unbolt from engine coil packs and remove module, install module(with a little diealetric) and reverse for install.

Anonymous

  • 1 Answer
  • Posted on Jun 18, 2009

SOURCE: 1991 olds wont start

I have no spark. Changed the CSS and still no spark. I also changed the Coil packs with a junk yard 1. Does anything else control spark other then ECM?
Thanks

pwetherhill

  • 44 Answers
  • Posted on Aug 21, 2009

SOURCE: vacuum line leak in 1988 Olds cutlass ciera SL

check all hoses on the engine that dont have water in them for cracks. you can do this by running it up to tempeature and the ones that are hot have water in them.

Anonymous

  • 548 Answers
  • Posted on Sep 01, 2009

SOURCE: 92 Olds Cutlass Ciera ignitian code needed

i dont have it but if you register at www.autozone.com you can get it for free and registering is free and they have all kinds of free help and diagrams for you

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass

There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

If you need further help, reach me via phone at https://www.6ya.com/expert/chris_b82b45c59bcf133d

1helpful
1answer

Where is the relay switch for the fuel pump in a 1995 Oldsmobile cutlass ciera?

The fuel pump relay is located under hood, passenger side, front side of wheelwell, mounted in relay panel. Here is wiring diagram of fuel pump circuit:


c1ae0e09-74db-430e-8caf-74e200175073.gif
0helpful
1answer

Turn signal flasher location 92 Oldsmobile Cutlass Supreme

There should be Flasher relay up under the dash. The four ways and turn signals are separate items and have their own fuses and relays.
0helpful
1answer

92 oldsmoble cutlass ciera when i turn on the lights for night driven the fuse for the tail light blows. i tried 30 amp and it still blows

There is a short somewhere.I would first check the brake light wires inside the trunk for grounding out on metal somewhere.
0helpful
1answer

1989 ciera orange wire going to the oil pressure switch was accidently grounded. Will turn over backfire but not start . Fuel pump won't power up. No power to fuel pump relay. Took relay apart manually...

You didn't post an engine size but you are correct in thinking there is a fusible link that blew when you grounded the orange wire but there is also an inline fuse that protects the oil pressure switch and the fuel pump relay. It is usually located on the firewall.

You can check the fusible links near the starter for continuity. If one of them is burnt up start there by replacing it. If none of them are bad you will need to find the inline fuse. At least the 3.3 liter engine is set up this way.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
2answers

92 Olds Cutlass Ciera ignitian code needed

i dont have it but if you register at www.autozone.com you can get it for free and registering is free and they have all kinds of free help and diagrams for you
0helpful
1answer

How do i install a ignition model into a 92 Cutlass Ciera

On v-6 it is in the front, tight working area. unplug wiring, remove spark plug wires(mark them for proper order for assembly) unbolt from engine coil packs and remove module, install module(with a little diealetric) and reverse for install.
1helpful
3answers

1991 olds wont start

I have no spark. Changed the CSS and still no spark. I also changed the Coil packs with a junk yard 1. Does anything else control spark other then ECM?
Thanks
Not finding what you are looking for?

439 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...