2002 Dodge Durango Logo

Related Topics:

M
Michael Pillow Posted on Oct 28, 2016

I have an 02 Durango R/T. On the passenger side by the firewall is a valve. I can't find any information on it. Any help would be greatly appreciated. Vehicle does have rear heat.

5 Related Answers

Anonymous

  • 145 Answers
  • Posted on Jun 08, 2009

SOURCE: 1999 Dodge Durango driver side window does not roll up nor down.

Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Ad

Anonymous

  • 3 Answers
  • Posted on Aug 02, 2009

SOURCE: Driver Heated Seat 03 Suburban

Identical thing here with my '03 Surburban LT.

Anonymous

  • 170 Answers
  • Posted on May 20, 2010

SOURCE: 2002 Durango: 99 durango rear brakes lock up. change perportiona...

Which year is your D,,,, 02 or 1999? In any case, both models have rear drum brakes. The 01 I had would be grabby on the rear shoes when it was damp or humid out for the first stop or two.

Anonymous

  • 4669 Answers
  • Posted on Dec 02, 2010

SOURCE: 2002 Chevy Venture 3.4 L 6 cylinder firing order.

135 is on the back and 246 is on the front. From passenger side to drivers side. Number 1 cylinder is the one under the alternator.

Testimonial: "Thank you very much."

Anonymous

  • 400 Answers
  • Posted on Jan 30, 2011

SOURCE: 02 pontiac grand prix blows out cold air on

Problem with the blend door actuator or wiring going to it (no separate fuse). Most of the time the actuator motor fails and won't close the blend door. I can't guarantee that it isn't a broken wire going to the actuator. It should set a trouble code in the BCM (body control computer) if its electrical because it looks for a feedback as to where the door is positioned.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the rear expansion valve located in a 2005 durango

I believe it is located on the passenger side firewall.
0helpful
1answer

Location of purge valve 2001 durango

  • It will be on the drivers side by the firewall and will look lik the diagram I posted below. It loos a little different then some do so this may be why it is a little tricky to identify.



11_9_2011_8_17_55_pm.png


  • Hope this helps
2helpful
2answers

What exactly is the "round

that is where your heater core is. Its leaking, or the feed hose to the heater core is leaking. You really need to pull the plastic cover off, just below the dash on the passenger side to look. the heater core looks like a small radiator. If coolant is leaking out of it, replace it. the coolant will cause problems in the long run, if you don't fix it now. After fixing it, steam clean the passenger side of the suv, to stop having a smell, and stop the corrosion. hope this helps
0helpful
1answer

I have a 02 durango and the passenger side tail light does not work replaced bulbs already blinker works and brake light works

had the same problem on my 02 the light sockets looked but when put new ones in problem solved
4helpful
2answers

Where is locate the heater control valve 02 S10 4.3

It will be in line with the heater hoses near the firewall on passengers side.
0helpful
1answer

02 Dodge Durango-rattling valves,abs & brake light off and on

Check vacuum lines in area of master cylinder as well as fluid level. As far as valves rattling, are referring to engine knock upon acceleration? Have knock sensor checked and/or replaced.
1helpful
1answer

1998 Dodge Durango

The vacuum check valve is leaking. It is under the hood and is inline with the vacuum source to the ac/heater system that runs into the firewall on the passenger side.
0helpful
1answer

Can't find low side service port to top off r-134a.

look up against the firewall on the passenger side and look in the corner on the same side
and see if your vehicle is listed on here www.autozone.com and if it is you can get diagrams and pictures
0helpful
1answer

Blower Not Working In Speeds 1 to 3

Try to locate blower motor wires, usually up under dash on passenger side, maybe behind glove box, and follow wires from motor and they will usually connect to housing area, and real good chance that connection is your resistor pack if held on by screws or small bolts. Other place that you may find resistor is opposite side of firewall from blower, under hood. Look for connection at firewall, usually on passenger side.
Not finding what you are looking for?

132 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...