1994 Cadillac Seville Logo

Related Topics:

J
Jerry Roach Posted on Oct 24, 2016

1994 Seville SLS

Service ride control error Traction disabled error No speedometer

5 Related Answers

Anonymous

  • 54 Answers
  • Posted on Jan 19, 2009

SOURCE: traction control problem

find out why the tech disabled it and what he did to do so.

Ad

Anonymous

  • 10 Answers
  • Posted on Feb 01, 2009

SOURCE: Message center says traction disabled

press and hold the off and temp warmer button on ac controller until  it reads out trouble codes on the display,  that should get you started. 

Anonymous

  • 2004 Answers
  • Posted on Apr 23, 2009

SOURCE: i have a 94 seville and it just cut off on me when

It would not cost so much but let's hope the engine is not knock yet.

Get an expert to handle checking and fixing for you. Your gaskets must be changed too.

Good luck.

Rate this please.

Anonymous

  • 1 Answer
  • Posted on Sep 15, 2009

SOURCE: abs light/traction control light

You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.

brandon day

  • 173 Answers
  • Posted on Apr 03, 2010

SOURCE: 1996 Cadillac SLS ABS and Traction lights

check the abs connections at every wheel .

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?

The light being on means the system has detected a problem in one or more sensors. The vibration is the ABS modulating the brakes to prevent skidding because it has detected a wheel that is locked up. That wheel is most likely the one sensor that is giving you the error.
0helpful
1answer

Traction disabled, car wont start

Your battery is no good - replace it.
1helpful
1answer

Turn on traction control on 94 sls?

With Cadillac, the traction control is on by default. there is no indication that it is on. You can disable it and notice comes up from that, but otherwise it is on.
0helpful
1answer

Need to replace serpentine belt and idler pulley for 1994 Cadillac Seville SLS and need diagram. It's not under hood on our car. We downloaded one diagram but it was not a match.

I had same issue. 1994 Cadillac Seville SLS serp diagrams not like my engine. Found that it is the same as 1993 Cadillac STS Northstar!
Try that, it worked for me. Good Luck.
3helpful
1answer

1996 Cadillac SLS ABS and Traction lights

check the abs connections at every wheel .
0helpful
1answer

94 cadillac seville sls

whats the numbers on the pcm? should start with 16 its located behind the glove box
1helpful
1answer

I have a 94 seville and it just cut off on me when i was driving. it said traction disable and low oil. it also says service ride control but thats been on there for a few weeks now.also it was already...

It would not cost so much but let's hope the engine is not knock yet.

Get an expert to handle checking and fixing for you. Your gaskets must be changed too.

Good luck.

Rate this please.
0helpful
1answer

Traction control problem

find out why the tech disabled it and what he did to do so.
2helpful
1answer

Message center says traction disabled

press and hold the off and temp warmer button on ac controller until  it reads out trouble codes on the display,  that should get you started. 
0helpful
1answer

95 seville sls jumps out of gear, losses fire, no speedometer

It may sound like a bunch of different problems but when in reality it could be just a VSS - vehicle speed sensor . The PCM/ ECM use's this information for shift point's , speedometer setting an someother systems on the vehicle . When you say it cut's off an will not start like it has no fire , what do you mean . Explain ! When you turn the key to start the starter engages the engine an spins it over but does start an run ? Or when you turn the key to start nothing happen's ? Traction control wouldn't work either with a bad VSS . You should take it to a qualified repair shop that has a professional type scanner to view codes in all the modules . If when you turn the key to the start position the starter does engage the engine an spin's it , no key or lock cylinder problem
Not finding what you are looking for?

80 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...