2000 Chevrolet Camaro Logo

Related Topics:

shannen ribron
shannen ribron Posted on Oct 15, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 2000 chevy comaro, v6 3.8. It has no get up and go.. ive changed the sparkpugs and wires as well as the alternator, it haseems a skip to it and hesitates wen driving and takes min to change

Hesitation, skip, no power to get up and go, wat could it be?

Answer This Question

1 Answer

oilyspill

oilyspill

Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Dedicated:

Visited the website for 20 consecutive days.

  • Chevrolet Expert 246 Answers
  • Posted on Oct 15, 2016
oilyspill
Chevrolet Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Dedicated:

Visited the website for 20 consecutive days.

Joined: Sep 16, 2016
Answers
246
Questions
0
Helped
104628
Points
792

How many miles on this engine? If there is an engine misfire, the trouble code should tell you which cylinder other than p0300. Then on a particular cylinder, you check fuel--spark--compression. Any applicable trouble codes? Did you use a gage and check proper fuel pressure?
A problem at higher rpms, the generic info says to check for a blockage of some kind, fuel--air--exhaust.
A problem at idle, generic info says to check for a leak of some kind, fuel--egr--vacuum.
When you say takes a minute to change? Are you talking about shifting gears--automatic, if so check vehicle speed sensor.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I need to change sparkpugs and wires. Kia 2003. I need pictures
https://www.google.com.au/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=changing+spark+plugs+%26+leads+2003+kia this page should help a lot :)
Read full answer
Dec 28, 2016 • Kia Cars & Trucks
0helpful
2answers

Hello my car stalls when i stop and stalls when im turning if you start it and leave it running you can hear the car try to stall and when you press the gas to go it skip
cleaning out an air filter is not like replacing still can starve engine --need to also check possible tune up needed --plugs wires --look at cat converter possible clogging --also check and clean or replace egr valve if carboned up will cause stalling and or no start
Read full answer
Sep 27, 2016 • 2000 Pontiac Bonneville
0helpful
1answer

I have 2000 chevy silverado 2500 series 4x4,6.0 liter.my check engine light keeps coming on. ive changed the oxygen sensor,plugs,wires,complete tune up. i all so changed the coil packs on cylinders 1 and...
what code is check engine lite giving
Read full answer
Feb 26, 2018 • 2000 Chevrolet Silverado 2500
0helpful
1answer

Can I put a 1994 Caprice 350 engine into a 1990 GMC 3/4 ton truck ?
yes but it will be difficult. a wiring harness swap will probably be needed since 93-94 were the experimental years for computers. you may need to swap trannys also. i advis you to have fun, the 5.7L chevy is one hell of a hot engine :) its the same one used in corvettes and comaros.
Read full answer
Feb 12, 2011 • 1994 Chevrolet Caprice
0helpful
1answer

Where is the fuel pump relay on a 96 chevy comaro 6 cyl. i know its behind kick panel but which relay is it?????
behind the drivers kick panel, the wires will be orange, red, gray, green/white, black/white hope this helps
Read full answer
Jan 21, 2011 • 1996 Chevrolet Camaro
2helpful
1answer

2000 chevy silverado 5.3, skips a little between 50-55mph, plugs and wires were changed. scanner shows bad knock sensor #2. will changing this correct the problem?
it should but recheck ur wires and plugs first a bad plug or wire can cause a knock ping problem and set off sensor also check the knock sensor connections at rear of engine----- the knock sensors for the 8 cyl are located under the intake manifold so its labor intensive to replace the sensor
Read full answer
Aug 22, 2010 • 2001 Chevrolet Silverado 1500
0helpful
1answer

Ive got a 1962 Chevy P.U. with a 261 Cu.In.moter. I switched out my old genirator for an alternator. Now i cant seem to keep my batterie charged especialy when i put the lights on.
In these times i hope you have a one wire alternator with a mecanicl voltege regulator if not maybe a electronic if it is electronic were did you hook up your switched power wire at not on the coil hot wire if so it is a resitence wire you may not be getting enuf voltage to activate your electronic regulator.
Read full answer
Aug 19, 2010 • 1983 Chevrolet Chevy
1helpful
1answer

My 2000 Chevy Blazer battery light is on. This
Could be anything from corrosion on cables, loose cables, lose or faulty wiring of wires behind alternator
defective voltage regulator. Visually inspect all the items noted. Then use a volt meter and measure the charging voltage of the alternator. It must be between 13,5 to 14.5 volts with and without accessories on at idle and 2000rpm. Anything below 13.5 weak battery or defective alternator ,lose wiring , corrosion. Anything above the 14.5 volts is a defective regulator.
Read full answer
Jul 06, 2010 • 2000 Chevrolet Blazer
0helpful
2answers

My 1990 chevy k1500 charging system isnt working ive changed the positve bat cable and the cable from the alternator to the junction box on the fire wall i put a new alternator in it out of the box it only...
this junction box! i think this may be an external regulater for the altenator and if so it may need replaced check it out!
Read full answer
Apr 14, 2010 • 1998 Chevrolet K1500
0helpful
1answer

Alternator not charging
Check for voltage with a multi meter or volt guage most of the GM trigger wires come from the computer and are only 5 volts. 5 volts is not enough to light some test lights. If still nothing the problem is probably the computer. But it can be manually excited. The two terminals in the alternator on the left of the pigtail (when looking from the front of the van) need + power. the far left is the trigger wire the one next to it is ignition power.
Read full answer
Dec 13, 2008 • 2000 Chevrolet 3500
Not finding what you are looking for?

View Most Popular

2000 Camaro

  • Cars & Trucks

Related Question

I need to change sparkpugs and wires. Kia 2003. I need pictures

  • Kia Cars & Trucks

Related Topics

44 views

Ask a Question

Usually answered in minutes!

Popular Questions

Service stabilitrak message and three lights on dash .traction control ,compatition mode

Chevrolet Camaro Cars & Trucks

How to by pass anti theft system on a 2010 chevy camaro

2010 Chevrolet Camaro

Need the ignition wiring diagram

Chevrolet Camaro Cars & Trucks

Where is the eval vent solenoid valve and how do

2010 Chevrolet Camaro

Replace fuel pump in 94 camaro without dropping the rearend?

1994 Chevrolet Camaro

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2000 Camaro Manual

2000 Camaro

Loading...