How do I reset Service E on 2008 Mercedes B200 Class

SOURCE: how to reset service light on a 2006 mercedes e class

1 key on #1 position
2 go to mph display in the cluster
3 press trip odometer knob three times (QUICK) voltage will appear on display
4 Select service menu using + or -
5 Service Indicator Displays Items
6 Press the menu systems button until the MPH display appears

SOURCE: I did a Service A on my mercedes c350. How do I reset the display

Turn the key on and turn the wheels lock to lock all the way left and right. This should clear it.

SOURCE: How to reset the B service notice on Mercedes C class 2008?

1. Turn key in ignition switch to position "1".
2. Press either Menu Button repeatedly until the basic kilometer or miles display is shown on the multifunction display .
3. Press the Reset/Illumination Button 3 times.
(You'll hear an audible beep and the voltage is shown on the multifunction display.)
4. Turn key in ignition switch to position "2".
5. Press the lower Display Button.
(The Service Display appears with miles remaining/exceeded etc.)
6. Press the Reset/Illumination Button 1 time.
(The Oil Type menu appears in the multifunction display.)
7. Select the engine oil grade by pressing the +/- Buttons.
(You may have only 1 option or multiple options depending on your engine.)
8. Press the upper Display Button.
9. Press the Reset/Illumination Button for 3 seconds to confirm.
10. Press the upper Display Button to return to the Service Display menu.
11. Press the upper Menu Button to display the kilometer or miles reading.
12. Turn key in ignition switch to position "0".

Please post back with any questions. Best of luck.
Greg

SOURCE: Mercedes e220 2008 (57 reg) reset service warning

do you have a standard key or a smart key?

SOURCE: 2008 mercedes benz 350 e

Use the steering wheel buttons, bottom left one till you get to "Settings" then UP arrow, then use the +/- on the right side till you get to "Instrument" or "Display" (depending on model) Use the arrows till you get to "Display units in miles / km" and use the + / - to change same. Escpae using the bottom left button.