At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Before you do anything make sure your battery cables are clean and tight. Loose cables can do this as well. If that's not the problem
sounds like your starter is drawing too much power and is on it's way out. Could cause a fire Better get it fixed.
2005 Ford Taurus maybe needind a recalibration of the ECM.For lack of power at highway speed,Misfire at load?low RPM also,The operation of a fuel pressure sensor is to limit voltage to the fuel pump when certain amount of fuel is not needed,and increase voltage when fuel is needed.If anything you need a recalibration of the ECM.
Hi, I had the same problem with no spark at my 1993 Cutlass. I changed DIS module, Crank Sensor and checked the coils and still no spark. the problem was at the cable between the Crank sensor and the DIS module that was in short circuit. the cable has two pins at crank Sensor and three at DIS Module. (I believe that the extra PIN is the ground because the cable is shielded). The original cable has no isolation. I bought the cable in a yunk yard and the spark appear again. Check it, because this cable is exposed to high temperatures and oil and for this reasson they lost the isolate.
It isn't a speed sensor. In 1989 all GM front drives were hydraulic shift. Do you know if it is a three speed or four speed. The speed sensor in 1989 only controls the speedometer. Also can you describe the problem. Does it just slip? Only certain gears?
×