1998 Oldsmobile Intrigue Logo

Related Topics:

Christine Hall Posted on Oct 02, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How do I remove the alternator from a 1998 Oldsmobile intrigue

1 Answer

Terry Hair

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Oldsmobile Master 4,134 Answers
  • Posted on Oct 02, 2016
Terry Hair
Oldsmobile Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 15, 2011
Answers
4134
Questions
2
Helped
1092020
Points
16804

Here is the procedure....



How do I remove the alternator from a 1998 Oldsmob - 26299069-usz5n5q55ej5tpgx0jyrm3et-4-0.gif The CS130D alternator, used on these engines, is serviced as a complete assembly only.

  1. Disconnect the negative battery cable.
  2. Remove the serpentine drive belt.
  3. Remove the alternator from brace.
  4. Remove the electrical connector from the alternator.
  5. Remove the retaining bolts from the alternator.
  6. Remove the protective boot from the alternator output "BAT" terminal and remove the nut. Disconnect the battery positive lead from the alternator.
  7. Remove the alternator from the vehicle.
To install:
  1. Position the replacement alternator to the engine bracket.
  2. Connect the battery positive lead to the alternator output "BAT" terminal and install the nut. Tighten the nut to 15 ft. lbs. (20 Nm). Install the protective boot over the terminal.
  3. Hand start the alternator front lower bolt and tighten to 37 ft. lbs. (50 Nm).
  4. Install the alternator brace stud through the alternator flange and the bracket and tighten the brace stud to 22 ft. lbs. (30 Nm).
  5. If equipped with the CS 144 alternator, install the inboard alternator bolt through the flange and into the alternator brace assembly and tighten to 37 ft. lbs. (50 Nm).
  6. If equipped with the CS 130D alternator, tighten the rear brace bolt to 22 ft. lbs. (30 Nm).
  7. Plug in the electrical connector to the alternator.
  8. Install the alternator front brace.
  9. Install the serpentine drive belt to the alternator pulley.
  10. Connect the negative battery terminal.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 1998 Intrigue went dead. Bought new battery and went dead again almost overnight. May be alternator or short. How do I know?

WHEN THE CAR IS RUNNING PULL THE GROUND OFF THE BATTERY POST CAR SHOULD STAY RUNNING, BATTERY IS ONLY FOR ACCESORIES AND STARTING THE CAR, IF IT DOESNT NEED TO REPLACE THE ALTERNATOR
1helpful
1answer

Heat stopped working in 2000 Oldsmobile intrigue. What could it be? I can't find the blower or HVAC relay and all fuses are good

fuse for the heater fan on a 2000 Oldsmobile Intrigue located. Passenger side, open the front door. On the side of the dash. These videos should help you locate them.
Interior Fuse Box Location 1998 2002 Oldsmobile Intrigue 1998 Oldsmobile...
0helpful
1answer

How to replace an alternator on 1999 intrigue oldsmobile

For a 3.5L

Remove Cross braces above battery and air box
remove battery
remove battery tray
disassemble air box
remove engine computer
remove air box
remove radiator fans
drain coolant
remove coolant resevoir
remove serpentine belt
remove thermostat
remove alternator out hole that battery was covering.
Install new thermostat seal.
0helpful
1answer

1998 olds intrigue alternater problems

Check your alternator: Start the car and then remove the positive wire from the battery, if the car dies it is the alternator.

Check your battery: Go to Advanced auto and ask them if they can test your battery for you, they will do it in the car for free. You may also ask them to test your alternator, some of them can do it in the car free.
0helpful
1answer
0helpful
1answer

Need help on nputing alt on intrigue

  • 1.Disconnect the battery by turning the positive terminal bolt in a counterclockwise direction with a 10mm socket wrench. Disconnect the terminal nut on the alternator by turning it counterclockwise with an open-ended wrench. Store the terminals away from the battery.

  • 2

    Disconnect the Intrigue's serpentine fan belt by pressing on the tension pulley arm firmly then working the belt out from underneath the idle pulley. Release the tension pulley arm so the belt will have enough slack to be removed from the alternator pulley wheel.

  • 3

    Remove the mount bolts by turning the nuts counterclockwise, holding the bolt head with a socket wrench. Slide the bolts out of the mount arms. Replace the alternator with a new unit by positioning it into the mount arms and sliding the bolts through the mount holes. Tighten all nuts securely.

  • 4

    Replace the drive belt by wrapping the belt around the alternator pulley wheel then pressing on the tension arm to slide the belt back underneath the idle pulley. Release the arm and the belt will tighten to an automatic adjustment.

  • 5

    Reconnect the alternator's wiring harness connection by placing the terminal over the connection bolt and securing the nut clockwise with a small wrench. Reconnect the battery by turning the terminal bolt clockwise with a 10 mm socket.


  • HOPE THIS HELPS.
    Read more: How to Replace an Alternator on an Oldsmobile Intrigue ' eHow.com http://www.ehow.com/how_5869760_replace-alternator-oldsmobile-intrigue.html#ixzz1EcKtn2WJ
    0helpful
    1answer

    1998 Oldsmobile Intrigue

    It is located on the back wall right under the alternator and idle pulley! hope this helps and you will need a funnel!
    0helpful
    1answer

    Ideals rough but drives great where is the map sensor

    The map sensor is located just below the alternator on top of the motor. It's easily removed. I just changed one on my intrigue. Their are no screws to remove, it just clips on. It is square in shape and the size of approx., a nickle.
    Not finding what you are looking for?

    651 views

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...