The first gear doesn't work but the other gears work just fine.
A bearing or bushing is worn. Standard is lot easier to fix than auto. Start off in second then downshift..see if that helps
Fist gears work , but if you cannot get it into first gear with out grating ( normally reverse will be at fault also) then it is not first gear but a clutch activation problem
if the gear is very noisy , it will be a clutch input shaft bearing or a problem in the bush/ bearing in the end of the crankshaft
if the bearing is faulty then 4th gear will keep jumping out of engagement
so check for air in a hydraulic system or a cable in a cable clutch
64 views
Usually answered in minutes!
×