Key stuck in ignition car stuck in park key won't go to off position

1 Set the emergency brake.
2 Insert key into the ignition and turn the ignition switch to the "ON" or "RUN" position. It is not necessary to start the engine.
3 Locate the shift lock override slot located on the shifter console near the shifter lever. Normally, the slot is plugged with a small plastic cap. Remove the cap.
4 Insert a small screwdriver, nail file, key or similarly shaped object into the override slot, push down and hold
5 While continuing to hold down the shift override mechanism, depress the brake pedal.
6 Now, grasp the shifter, push in the release button located on the shifter as you normally do and then move the shifter to the desired gear. If you've completed these steps with the engine off, move the shifter to the Neutral position to start the engine.

Dont know if this helps

i presume this is a x300 series, you should hear a click from the gear selector area when you press the brake pedal with the ignition on, if not the park release soleniod is not working, the common cause of this is the brake pedal switch faulty, you can manualy release it by removing the little star shaped plug near the gear lever and inserting a small object like a screwdriver or your key, then select N and start engine,

that is park lock failure, build into the shifter section,it has an
electric solenoid lock. and a bypass button.
in the glove box, see oper. guide, it tells you where the erg. release
button location, and varies by sub body type and options.
its hidden cover, or a slot, on most cars. the slot type is to insert
any key in slot and push. bang, it opens (brake set,etc)

some cars have a little button near the shifter if yours has one hold it down while trying to change the gear amd try turning the key on as well

the problem is not in the ignition it is mostly on the gear selector knob. Might show that it is in Parking position and is not completely in.Push with your hand further in Parking and try to remove the key.If no success the ask from an expert to check it.

Most newer models have a safety feature called
shift interlock. This prevents the key from being turned back
to the lock position if you forget to place the gear selector in park.
Depending on the model,
If it uses a cable, it may be sticking or needs adjusting.
If it uses an electrical solenoid. may be blown fuse or park switch.
Tap, shake, and pull up on the shifter and make sure it's in park.

Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Hope this helps all.... If the key is stuck (won't come out) and the column is NOT locked, on the gear shift there is a plastic sleeve. Put the gear shift in park...slide your hand below the knob and pull that sleeve up! Presto!!! it locks in park and the key comes out. I just put all the stuff i took apart back together... the other solutions may work but this is the first step to check... no tools and you know right away...
AJay

do not try to put the key in lock. if it will still start, then you will be able to replace the lock cylinder. if you rotate it to lock then you might not get it to turn again. as for the gear selector, there is a release on the shifter. some have a slot to stick a key and push down as you change gears. others you may have to take apart the console, and you will see the release lever.

There is a small sleeve just below the shift knob on the ford focus - it can slide down and trigger a sensor in the gear box that tells the car it is not in park even when it is. Push the sensor back up toward the knob (with the car in park) and the key should release.