2006 Hyundai Elantra Logo

Related Topics:

J
James Moran Posted on Sep 02, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

No fluid 2006 hondyu elantra winshield washer

Motor works no fluid

1 Answer

Dan Apthorp

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Hyundai Master 2,824 Answers
  • Posted on Sep 02, 2016
Dan Apthorp
Hyundai Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 23, 2013
Answers
2824
Questions
0
Helped
889926
Points
7391

Just asking
Is the washer tank full of fluid?
Check the hoses and jets on the windshield They could be plugged. The pump could have dirt in it. The tank could be dirty where the fluid is sucked out of the tank itself .You can take the hose off the pump then try to make the pump work. If it squirts then you know you have dirt some place.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Winshield washer not working is their a fuse for this

There's a 20amp(fuse#20) fuse box on driver feet that control both wiper and washer. If the wiper is working, then it's not the fuse. It might be your washer motor, but if you live in WI live me. Your washer fluid might have frozen.
3helpful
3answers

Winshield washer fluid will not come out and you can not hear the motor the fuses are fine do I need a new motor for the winshield washer fluid. any advice would be very much appreciated.

WIPER FLUID LEVEL COULD BE LOW. ADD SOME MORE WIPER FLUID.IF FLUID LEVEL OKAY CHECK WIPER SPRAY NOZZLES COULD BE CLOGGED CLEAN THEM WITH A SMALL PIECE OF WIRE SMALL AS TINY PAPER CLIP WHICH CAN BE USED..
1helpful
2answers

Where is the rear windshield washer well in a 2006 isuzu ascender

THE REAR WINDSHIELD WASH IS FED BY THE SCREEN WASHER FLUID RESERVOIR IN THE ENGINE CONPARTMENT.
1helpful
2answers

Winshield washer fluid doesnt come out do i need the motor or fus

can you hear the pump running.  If not check the fuses.  If you do and there is fluid.  Remove a hose from the back of the nozzle and se if fluid flows.  If so clean the nozzles with a needle as they plug up.
0helpful
1answer

2006 Envoy Winshield washer fluid pump seems to run you can hear a hum, but flud only comes out the nozzle about 2 inches. What could be the problem and how do i fix it. Thanks Greg

pull the washer tank out and clean the fluid stainer that the pump sucks it's fluid through, use only premixed fluid to avoid this problem in the future.
0helpful
2answers

Winshield washer fluid

Sometimes they have a port in the back along the inside behind an access panel. Others have a seperate washer fluid tank in the motor compartment. See if there is an access panel behind the rear seat on either side.
0helpful
2answers

Replacing windshield washer pump

I assume you access from underneath. Remove plastic shroud and expose reservoir and pump? right?
0helpful
1answer

Winshield washer 2002 LeSabre

try the fuse first. then try sticking a pin into the washer jets. then try having the washer fluid pump/motor replace. if those are not the case, then you need a new switch to operate the pump motor. (a whole new control column)
3helpful
1answer

Winshield washer motor does not run

These days, most windshield washer pumps are mounted to the bottom of the washer fluid reservoir. Where’s that, you ask? Well, inner+fender+w+text.jpgyou know that spout you pour the fluid into—the one that disappears into nowhere? Well, the reservoir is actually 2384f71.jpglocated inside the front fender between the bumper and the front wheel. To replace the pump, you will have to jack up the vehicle, remove the front wheel and then remove the inner fender liner.
Not finding what you are looking for?

50 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...