2004 Holden Astra Logo

Related Topics:

J
John Biddle Posted on Sep 01, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Please help I've removed all the screws and clips from my rear door card of an Astra 2004 with electric Windows but the card is stuck at the weather strip at top any help would be great TIA

2004 Holden Astra Auto CDX

1 Answer

john h

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Holden Master 29,494 Answers
  • Posted on Sep 01, 2016
john h
Holden Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 07, 2009
Answers
29494
Questions
0
Helped
7557437
Points
193449

Push top down and forward toward glass to release the clips

5 Related Answers

Anonymous

  • 4803 Answers
  • Posted on Mar 24, 2012

SOURCE: my high beam lights & parking lights work, but not the normal lights.1985 holden astra!

By "normal lights" I assume you mean "low-beam headlamps"? If this is true, then you may either have burned out headlamp bulbs or a faulty low-beam headlamp relay or relay circuit.

Testimonial: "Thank you for your assistance. Burnt out low beam headlamp bulbs was the problem. They said it was unusual for both to go at the same time, but that's how it was. Your help was greatly appreciated. "

Ad

montehammons

  • 5531 Answers
  • Posted on Jul 08, 2014

SOURCE: How do I remove the external door handles of a Holden Astra AH 2007?

There are two studs on the backside of the outer handle, where it mounts on the door. They stick through holes in the door, and a nut on the inside holds it fast to the door.
First, or next, you have to release the plastic retainer clips on the rod(s) to the handle. Push the retainer clip off and away from the rod, and the rod should come out of the hole in the handle . Then you can remove the handle from the door.

rfaber98

Richard Faber

  • 1326 Answers
  • Posted on Apr 16, 2015

SOURCE: How do I remove a manual window winder handle from Holden astra equip 2003 model? There is no c clip to remove.

Clip is behind handle

A

Anonymous

  • Posted on Apr 26, 2015

SOURCE: 2010 CDX Holden Cruise has it got a bleeder valve screw for radiator/heating coolant? if yes where is it located? Need to bleed the wifes car so she stops complaining to me bout noise. Please help

Any radiator I ever flushed had a valve near the bottom of the radiator that stuck out. I am concerned about noise though-sure your water pump is not going out?

lpfaff1

L Pfaff

  • 11573 Answers
  • Posted on Jan 06, 2016

SOURCE: 2005 Holden astra won't go into 4th gear and it's auto is.it Tue gearbox?

could be a transmission solenoid problem, check link below ASTRA AH 2005 2009 AUTOMATIC GEARBOX BAR SHIFTER ASSEMBLY
pres helpful button

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

I need instructions, written and hopefully with photo examples, that will teach me how to replace the passenger side mirror on my Ford Sport Trac. The truck is a 2004 model and the mirror is motorized...

Removal and Installation
NOTE: LH door is shown, RH door is similar.
  1. Disconnect the battery. For additional information, refer to Section 414-01.
  1. Remove the front door window control switch panel and trim covers.
    1. Remove the door screw cover.
    1. If equipped with power windows, remove the door window control switch and disconnect the electrical connectors.
    1. Remove the door handle bezel
ganyapr_2.jpg
3. Remove the door handle screws


ganyapr_3.jpg
  1. If not equipped with power windows, remove the screw and the window regulator handle.
  1. Remove the screws and the front door trim panel.
ganyapr_4.jpg6. Remove the door speaker Remove the screws.
Disconnect the electrical connector.
Remove the door speaker.
7. Disconnect the exterior rear view mirror electrical connector
ganyapr_5.jpg
8. Remove the nuts and the exterior rear view mirror.
Feed the power mirror wiring through the opening in the front door.
ganyapr_6.jpg
9. To install, reverse the removal procedure

i hope that this could help you
2010&c18=modelyear&c20=n712771&c35=wsm%2cfront%20door%20trim%20panel%2cs5r%2c501-05%2cremoval%20and%20installation&s=1280x800&c=32&j=1.3&v=y&k=y&bw=931&bh=469&ct=lan&hp=n&[aqe]
0helpful
1answer

My driver side window fell out of place how do i get the door panel off to get to the window? i cant get the middle off its stuck on there pretty good help me please

Chances are you need to get a screw or two out still. If the panel seems like it wants off but the center is still stuck pretty good, it's probably because it's bolted down. Along with the clips you got loose all around the edge of the door panel, the armrest and door handles may be bolted to the door through the panel. These screws may be under plugs you have to remove first. You probably have power windows right? If not the clip behind the window regulator needs to be removed and the regulator pulled off. (Do this with window regulator removal tool or two flathead screwdrivers.) After all the screws are removed, clips popped out of door, and regulator removed (if equipped) you should be able to lift panel off. May need to lift panel over door locks or door handle to remove. Careful of wiring harnesses for electric locks and windows and speaker wires in door. Should be able to disconnect and reconnect easily.

If you damaged the clips upon removal no worries. You can go to your parts store and buy new ones to replace them so the panel goes back on nice and tight.

I hope this helps.
11helpful
1answer

I need to remove the rear door interior panel on my 2004 cts cadillac . the window has jumped off the track.

on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.pull back the weather seal and you'll be able to get to the track
2helpful
1answer

How do I remove the right rear door panel? I removed the 3 screws but dont see clips.

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
21helpful
1answer

How do I remove the REAR door panel on my 2004 Cadillac Deville dts

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
2helpful
1answer

Need to remove the windows switch

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
4helpful
1answer

How do i remove the right rear door panel on a 04 Chrysler Sebring

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
18helpful
1answer

How to remove front door panel to replace window electrical motor, Audi A4 2004 model 2l

FIRST CHECK THE CABLES THAT RUN INTO THE DOOR BECAUSE THEY CAN GET CUT THOUGH COMMON PROBLEM (JUST WERE THE DOOR HINGES INSIDE RUBBER BOOT.) DOOR PANEL REMOVAL...... PRIZE OUT THE TRIM PANEL AT THE BASE OF ARMREST UNDO TWO SCREWS (DRIVERS SIDE) OR ONE SCREW ACCESSIBLE THROUGH THE ARMREST UNDO THE SCREW AT THE BASE OF THE DOOR TRIM IN THE CENTRE. STARTING AT THE FRONT EDGE CAREFULLY PULL THE TRIM PANEL (ABOVE THE INTERIOR RELEASE HANDLE ) AWAY FROM THE DOOR TO RELEASE THE CLIPS, THEN SLIDE IT TO THE FRONT TO UNHOOK THE REAR EDGE OF THE TRIM PANEL.UNDO THE 4 SCREWS IN THE TRIM PANEL RECESS NOW PULL THE DOOR PANELAWAY FROM THE DOOR FRAME RELEASING THE RETAINING CLIPS, SOME FORCE WILL BE NEEDED PREPARE FOR SOME CLIPS TO BE BROKEN THEN LIFT THE DOOR PANEL UP SQUARELY NOW YOU CAN EASILY GAIN ACCESS TO ELECTRIC MOTOR.HOPE I WAS SOME HELP TO YOU THANKS STAN
6helpful
2answers

Driver side power window stopped working

The door panel is held on by plastic clips and 5 screws. 3 screws are on the bottom and 1 in the pull cup and 1 in the inner door handle.Then grab one of the corners and give a small tug, when you get some of the clips to pop out then proceed around the whole panel. To replace the panel take the clips out of the door with a fork and slide them back into the panel and then line it up on the door and use your hand like a hammer and bang the panel back on. Hope this helps
1helpful
1answer

2004 Ford Explore - Rear Windows

WINDOWS ARE STUCK IN THE WEATHER STRIP. START VEHICLE HOLD SWITCH DOWN AND HIT THE INSIDE OF THE DOOR PANEL NEAR THE BOTOM. WINDOW SHOULD COME DOWN. THEN LUBE WEATHER STRIPS .

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/terry_db4da071b7da3ac1

Not finding what you are looking for?

206 views

Ask a Question

Usually answered in minutes!

Top Holden Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...