Requert torque settings for a 1982 opel kadette. Thankd

It could be many things. check the link

https://www.google.com/search?q=Opel+Kadette+1.4.+The+timing+set%2C+starts+but+no+revs

An auto electrician with a pro grade scan tool can diagnose in 20 minutes. Better than guessing and replacing the engine!

https://www.google.com/search?q=mobile+auto+electrician+near+me

..

Fixya does not have specs for every vehicle made. But this link might help you https://www.google.com/search?q=Settings+for+big+end+and+mains+on+1.2+opel+kadett+1983&hl=en&source=lnms&tbm=isch&sa=X&ved=2ahUKEwi-7Yic-PLuAhVVeH0KHeTICZ4Q_AUoAnoECBEQBA&biw=1366&bih=625


You can also try google or the service manual.

8v or 16v engine?
The latest torque value is often supplied with the replacement head gasket.

You should verify these figures from an official source but with any stretched or corroded bolts replaced and with all male and female threads thoroughly cleaned and lubricated along with the washers and under the bolt heads, the bolts are tightened in stages in a spiral pattern working outwards from the centre pair to an initial torque of 18 lbft.
As an example, many of the 8 valve Vauxhall/Opel engines are then tightened by 60 degrees + 60 +60 and then after a thorough warm up and at least 6 hours cooling the bolts are tightened a further 30/50 degrees depending on "feel".

Sorry we do not have that, just to old.

Torque setting for what component exactly?

head torque for the petrol engine is 65lbs nice motors in their time these cars

Conrod torque settings for opel cadett 1.6 gse

main bearing ranges torque = 50Nm - 54Nm
or 35 - 40 ft lbs

The nearest I could come to your engine was for a 1979 Opel 4, torque was 72ft.lb.

Not even sure who makes those cars but this should hopefully help you

http://vsmus-origin.skf.com/Files/Brochures_in_PDF/457377.pdf

Please take a moment to rate this solution.. thanks