P0141 faulty code of Holden Cruze anyone knows the exact meaning? Need help thanks.

The 'premium' fuel shouldn't really affect your vehicle especially as it is reasonably new. You will need to find out what has caused the Engine warning light to come on. These means you will need to get it plugged into a diagnostic system or an OBD2 scanner to read for any trouble codes. If you do not have access to one you will have to pay for the scan.
*Note* Get prices from 4 or 5 places as prices can be VERY different.
Use the comment button below and I'll try to help you more.

Use code reader to check fault codes

https://www.obd-codes.com/p0128

https://www.obd-codes.com/p0141

https://www.engine-codes.com/p1457.html

GM OBD Trouble Code 26
Quad Driver Module (QDM A) Error The ECM uses "quad drivers" to control its output devices. Each quad driver is capable of controlling up to four devices.
Fault Code Description

• 26 - Quad Driver Module (QDM A) error

Symptoms

• Improper operation of an ECM-controlled device

Common Problems

• Code 26 does not mean there is an internal ECM failure
• Code 26 can indicate a circuit problem (open or shorted) in one of the devices controlled by QDM A
• Some diagnostic charts may state which devices are controlled by QDM A. In other cases, it may be necessary to monitor which ECM-controlled devices are operating when the Check Engine Light comes on in order to determine which circuit is causing the problem.

get it scanned for the trouble code

Hi Graeme This one I would suggest taking to Holden for Diagnosis. One really needs to carry out some checks on the engine, Areas to check, Thermostat, is your vehicle loosing coolant possible Egr cooler leaking internally(normally series 2 engine). are the fans switching on? as I mentioned many areas require checking. Is there any internal sludging in the engine? Possible problem with cylinder head. It really needs a qualified person to look at it and plug in a diagnostic computer to see if that gives any clues. Sorry I'm not able to help any more than that. Good luck

take it to a parts store and have them pull the codes to see exactly what the problem is. Most places will do this for free

https://www.engine-light-help.com/chevy-check-engine-light
.html

This should help

There are numerous causes for the check engine warning light to display.

You need to have the vehicle scanned for fault codes to see what fault codes the vehicle's computer has generated. Once that has been done the mechanics can diagnose the causes of those fault codes and then make what ever repairs or parts replacements that may be needed. It may only be a minor issue. You cannot assume what the likely problem might be and replace parts and hope for the best.
I suggest you either get the car to Holden service or to an independent mechanic who is familiar with the Cruze and has the necessary diagnostic equipment.

This is the vehicle's check engine light, and it means that the on-board diagnostic computer has detected a fault and stored a service code. Your Holden dealer, any reputable mechanic, and many auto parts stores can retrieve the code and tell you what part or system requires service.

Bill B.