Spec for pressure plate 2003 toy tacoma v6 - 2003 Toyota Tacoma

60 Ft Pounds.

Torque:19 N·m (195 kgf·cm, 14 ft·lbf)
Don't over torque them as they will snap

try a real toy forum, on tacoma (there classifieds, with WTB)
or use craigs list, and post a WTB.
big time hits the latter. try it.

denso K16TR11 or ngk BKR5EKB-11. Two brands and numbers. the gap is 1.1mm or 0.043in.

.044( thousand's of an inch) . Hope it helps you. Happy wrenching :)

There is a gasket supplied when you buy the transmission filter for all transmissions that your vehicle would have came with. You don't want to be using that stuff on a transmission pan, as a replacement for a gasket. I would wonder if the filter was changed?

750 is fine but from a professional view, you should always replace with what the manufacturer recomends

I currently have a 1998 Toyota Tacoma, and the clutch pedal does not return all the way. I know it is not the clutch, it is actually the spring located underneath the pedal. It is catching and not releasing after pushed.... Hope it helps.

There is a company in Northern Ireland called Exact Engineering that can convert your dual mass flywheel to single mass using a complex engineering process ending with a finely balanced guaranteed single mass product. They have a complete courir service.

You can see their website at www.exact-spec.com and contact them at [email protected]