Belt routing for 2001 Sebring 2.4 engine - Cars & Trucks

SOURCE: serpentine belt

As silly as this may sound there should be a picture under your hood. It will be labeled " belt routing". If the diagram is missing then you can pick up a chilton manual at your local parts house for about $20. It also has a ton of other useful info that may surprise you. Hope this info helps. Good luck.

SOURCE: need serpentine belt routing for 2006 chrysler

Hello Damon104.
The best way to help you with this question is to give you this site.
Dayco belts offers this and covers most makes and models.

www.mvreader.com/multiview/dayco/index.php?bgInterchange=1&l=n

I hope your repair goes well for you.

Kl

SOURCE: I need the serpentine belt routing diagram for

Most vehicles have the routing in the engine compartment, near the top of the radiator or underneath the hood. If no luck consult your owners manual.

SOURCE: need a serpentine belt routing diagram for 2001

it doesn't show you under the hood near the hood latch ,newer vehicle it should. check this first.

Jeffrey Turcotte

• 8991 Answers
• Posted on Oct 27, 2011

SOURCE: Need belt routing diagram for 2001 chrysler sebring lxi

Thanks for using FixYa.

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze

Fig. Accessory drive belt routing-Chrysler 2.7L engine

2.7L Engine
A/C & Alternator Belt

1. Raise and safely support the vehicle.
2. Remove the right front wheel and belt splash shield.
3. Loosen tensioner locking bolt and pivot bolt.
4. Rotate tensioner clockwise to allow enough slack to remove belt

1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
2. Adjust drive belt tension.
3. Install the belt splash shield and right front wheel.
4. Lower vehicle.
   
   
   

   Fig. Installing A/C & alternator belt-2.7L engine
   

1. Before servicing the vehicle, refer to the Precautions Section.
2. Raise and safely support the vehicle.
3. Remove the right front wheel and belt splash shield.
4. Loosen the tensioner locking bolt and pivot bolt.
5. Rotate tensioner clockwise to allow enough slack to remove the belt

1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
2. Adjust the drive belt tension.
3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
4. Lower the vehicle.
   

1. Raise and safely support the vehicle.
2. Remove the right front wheel and belt splash shield.
3. Remove the air conditioning compressor/alternator belt.
4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
5. Remove the power steering belt.

1. Install the power steering belt on pulleys.
2. Adjust drive belt tension.
3. Install the air conditioning compressor/alternator belt.
4. Install the belt splash shield and right front wheel.
5. Lower vehicle.