At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually you wouldn't connect a vacuum hose to the air filter, but if its a DIY job your after you would need to get the male connectors and some other hardware to do a custom job (drilling required) otherwise to have the same effect you could just connect a vacuum hose to the Intake Manifold or throttle body.
The Intake manifold usually has some spare slots for small vacuum hoses.
To locate follow the air filter box tube back to the throttle body, the throttle body, the intake is directly off this and connects to the engine. see diagram
it may be the pcv valve ( positive crankcase ventilation) that needs replaced. if a pcv valve fails, it will put oil in air cleaner or throttle body. check to be sure hose to valve is not clogged up. its only about a 5.00 part. have a good one !!
My apologies for the delayed response. I am going back to answer unanswered questions.
CLICKon the following LINK. It has all the Diagrams for your Timing Belt that you will need. If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com! Again my sincerest apologies... Thanks!
i wouldnt do i fuel filter unless it is for sure that it needs to be done.
try changing the plugs and spraying out the throttle body in front of the butterfly plate.
there is going to be a lot of black carbon builtup preventing the tbi from breathing at an idle position.the inside of the throttle body or tbi should be very nice and clean.
changing an fuel filter thats not needed can cause more problems for an extra cost.of the not needed parts.fuel filters only should be replaced at a loss of power or pickup or something like that.
anything rough is in plugs and intakes.
The first two should be for California, the other two, everywhere else but a lot of regions require CA emissions. If the upload doesn't go as planned, the CA ones have an EGR valve
×