Remove airbag fuse. Disconnect battery. Remove two/4 screws (usually Torx-forget the size but rather large maybe T7) from the back side of the steering wheel. Remove airbag assemble . Carefully disconnect the harnesses. Remove the large steering wheel retaining nut. Using a steering wheel puller remove the steering wheel. At this point you may need to remove the shroud from the steering column. Usually t 10 or T15 screws. Remove retaining screws from the multi function switch. Carefully un plug and remove. Installation is reverse. Highly recommend a haynes or Chilton repair manual for this job. Steering wheel puller can be rented from most auto parts chain stores.
173 views
Usually answered in minutes!
×