The left turn signal doesn't work from the lever, right signal does, both work when hazard button is pressed. I have also eliminated that the lever multi-switch is not the problem by connecting the pins of the turn signals manually. I am pretty sure the flasher relay works because it turns on when the hazard button is pressed. Any other problematic wires or components?
Sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck
Testimonial: "thanks but I know its not the bulbs because they work when the hazard buttons pressed, ill double check the fuses again."
SOURCE: 1992 Plyjouth Sundance turn signals won't
Hi There are various reasons that the turn signals might not be working. First of all check your fuses to make sure none of them are blown; next, check your bulbs. In your case if those are in good condition as you said then it might be your turn signal relay--in many car models these are located around the fuse panel somewhere, although they may not be immediately visible--also check to see if your hazard lights are working--if they are, and your fuses and bulbs aren't burnt it's probably your signal relay (note: there is one for the hazards and one for the turn signals) If your hazards and your turn signals are not working you may have a more in depth electrical problem, or both relays could be blown--however unlikely. One of the last things is look at the actual switch in the driving column that turns on your signals. Thank you for contacting fixya.com
Please get back to us if you have further query else please accept the suggestion.
SOURCE: 1999 Plymouth Voyager....right turn signal
Have you tried replacing bulb and cleaning socket contacts at same time?
SOURCE: location of flasher unit on
You are having problems with grounding issues. Take your turn signals apart and clean the corrosion out of the light sockets. Replace any bulbs that are blackened inside or not clear. When all the light sockets are clean all blinkers should work/flash correctly.
819 views
Usually answered in minutes!
update: I took off the windshield wipers and the guard for them today because the drains were clogged and while in the car are hit the turn signal switch and well the left turn signal worked (fancy that), but of course it stopped working when everything was back together. did taking the guard off fix it or was it or was just a fluke? I dont know, but I do know this is a wiring problem because all the components (lights, switch lever, relay, fuses)work. Anybody know where such wires or connectors might be?
×