2003 Mercury Grand Marquis Logo

Related Topics:

G
Gayle Posted on Jun 27, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Why doesn't my 2003 Mercury Marquis blow cold air after a new, EAT, Fan, Alternator, and Battery?

The garage mechanic that installed them has not evacuated and installed new refrigerate like we and also his boss/owner asked them to in case there is dirt in the old refrigerant. We want to make sure there is not a clogged line. Thank you for your answer.

1 Answer

Jeff Armer

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mercury Master 15,575 Answers
  • Posted on Jun 27, 2016
Jeff Armer
Mercury Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 22, 2012
Answers
15575
Questions
1
Helped
7109417
Points
73899

Does the compressor turn on when you push the A/C turn on button ?

Testimonial: "Yes. And it only gets warm when it is idling."

  • Jeff Armer Jun 29, 2016

    What fan was replaced ? Radiator ? Does it get cold when driving at highway speed ?

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why won't my Mercury Grand Marquis's AC blow cold air? We asked them to replace the old Refrigerant, but instead they put in anew EATC, Alternator, Fan, and Battery.

faulty install take it back
system may have a leak .
O ring or pipe connection not tight enough
not enough gas added

was tx valve replaced or the newer inline variant of a tx valve
0helpful
1answer

I have poor air circulation for my 2001 Mercury grand marquis. I only get air from one dash vent. the blower goes up and down but even on high it seems like it is medium

well, if nothing was disconnected on the ducts and the selector works fine , my guess will be that you have a nest in the fan it self, take it out and clean the nest so the fan can blow full amount of air. good luck.
0helpful
1answer

Why does my air conditioner in my mercury marquis goes off and on,but blows cold air?

the fan motor or wiring might be at fault , loose connection.
even the fuse panel too.
0helpful
1answer

My 2008 Mercury Grand Marquis does not blow air. You can adjust the temperature, and you will feel cold air (or warm air) but the fan doesn't work. My mechanic is saying we need a whole new in-dash...

first check fuse relay to blower motor and check see if blower motor working remove and hotwire it if yes control module bad if blower motor dont work its faulty.
2helpful
1answer

My 2003 Grand Marquis blows warm to hot air out even if I put it on a/c automatic or vent?

your blend door is not working properly, common on Fords-you can manually close it for cold air, or it can be repaired with an upgraded arm that is stronger and less prone to breakage.
0helpful
1answer

Heater in mercury marquis doesn't come on. Cold

Hello. The most common cause for no heat is the thermostat. This is a quick and easy repair. Go to any autozone or similar parts store for the part. They may even install it for you.
0helpful
1answer

A/c working, only blowing hot air on 2003 mercury

The actuator is in the duct venting behind dash panel.
1helpful
2answers

A/C fan speed not working

There are a total of 5 fuses which affect blower fan (correct terminology) speed. One is a 40 amp unit in the fuse block under the hood. (Passenger side) The other 4 are in the fuse block under the passenger side of the dash board. Check them all.
Charlie
0helpful
1answer

Ac or heat wont blow

Needs a blower motor resistor if the fan only blows on one speed. It is located underneath the firewall on the outside, near where the passenger exhaust system is. You need to take the passenger side cat converter off to get to it.
Not finding what you are looking for?

87 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...