What size are the bed bolts on a chevy.half ton pickup what size socket?

SOURCE: chevy 1993 half ton 4 wheel drive

Is your 4x4 light coming on? Does the shifter move smoothly into position? I have a 95 that I have just about had every proplem imaginable. Need morre info. John.

SOURCE: Star bit on front brake 2000 chevy 1500 ?

YES THEY COME IN METRIC SIZES. AND,MOST GM PRODUCTS ARE ALL METRIC THESE DAYS. GET A MERTIC SET. YOU WILL ALWAYS USE THEM AGAIN. TOOLS ARE A GOOD INVESTMENT.

SOURCE: i need to know what

i need to know witch mark i need to use to set my timing

SOURCE: Chevy S10 Pickup Starter. Removed the two bolts

Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

SOURCE: Power steering pump on a 1978 Chevy half ton

First, remove the ps belt by loosing the adjustment bolts, then remove the hoses from behind it, then unbolt the bracket from the engine that the pump sits in. I believe that there are three bolts that do this. One off of the exhaust manifold, one on top and one underneath. Once you have gotten pump off of the motor you need to remove the pulley from the pump. KD tools make a great tool for this, part # KD 2897, about 60 bucks at napa. Follow the directions with the tool to remove the pulley and to replace it on the new one. New pumps don't come with the pulley and can be bought with the resevior. The pulley has to come off to get the pump out of the mounting bracket.