At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
May be a bad ground behind the cluster. Use a couple of bent pieces of metal on the side and pull cluster out a little. There is a fuse soldered on the back of the cluster. Go to benzworld dot org for more forums specific to your car.
hello,hoping your 98 mb s320 is 140 model,try to check fuse in base module located at left side standing in front,remove 4 pcs.allen screw ,visual check your fuse,renew if needed,be sure you have freon gas in your system,if not corrected,send your car for proper diagnosing,ty
Hi,
If the light came on before you changed pads, you will need to replace the sensor.
The sensor consists of only a wire link embedded in a hard plastic. This is worn through when the pads are nearly worn out.
To check which sensor it is, it's easier to unplug the sensor, and check with a continuity checker. If there is no continuity, you need to replace it.
Thanks for using Fixya! If this solves the problem, please rate as such. Thank you.
×