Question about 1991 Buick Regal
Trying to remove door panel of car
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: how do remove the window
the window handle ( crank ) is held on by a small wire clip that can be accessed between the handle and the door panel.
push in on the door panel around the base of the handle, and thry this now gap you should be able to see the clip,, I always use a 'small' screw driver (flat blade ) and carefully pull the clip up and off the handle ---- NOTE: be very careful when removing the clip as they do tend to spring off and fly in just about every direction and can get lost very easy.
when re-installing the handle -- just put the clip on the handle and press the handle in twords the door panel and it will clip itself back on.
Posted on Jan 20, 2011
Tips for a great answer:
Oct 10, 2014 | 2006 Citroen C3 1.4i
Apr 30, 2014 | Cars & Trucks
Mar 15, 2013 | Cars & Trucks
The process of removing car door panels is essentially the same for each make of car. You may need to remove these panels when your fixing locks or power windows, replacing window cranks, installing speakers or replacing the side mirrors. Learning how to remove the panels yourself can save money on simple car repairs.
Check out how the door panels are attached to the car. Most panels use screws and bolts but others have snap-in fittings. Gather all the tools you need for removing the door panels. If the panel is attached with screws and bolts, you need a screwdriver or ratchet and socket. Car door panels with snap-in fittings are easily removed with a flathead screwdriver.
Locate where the screws and bolts are before starting. These are usually found in the arm rest area, along the bottom or sometimes near the door lights.
Roll down the car door window. Begin removing all screws and bolts that hold the door panel onto the car. If your car has snap-in fittings, pry gently on the bottom corner of the door panel until the fittings pop out.
Remove the power window control panel if your car has power windows. The control panel should pry out easily, and then you unplug the wiring harness from the back and place it to the side.
Use an L pick and flashlight when locating a manual window crank. Look behind the window crank and slide the pick under the edge of the metal clip that holds the crank in place. Remove the clip and pull the crank off.
Remove the door handle by unscrewing the small screw located in the center. Gently pull the door handle out until you see the back of the handle and unclip the rod from the door handle. This should remove the handle unless the handle and door lock are attached, then you just unclip the rod from the lock and remove them both together.
Unscrew the cap off rear upper corner door panel locks. These don't have a rod attaching them to the handle and unscrew separately from the door handle.
Pop the door panel off after you've removed everything. Gently pry on the bottom edge of the door panel until it releases. Pull out and up to completely remove the door panel.
Jan 10, 2012 | 1998 Oldsmobile Silhouette
Dec 03, 2010 | 2005 Audi A3
May 13, 2009 | 2000 Volkswagen Beetle
May 03, 2009 | 1995 Pontiac Grand Am
Mar 25, 2009 | 2002 Kia Optima
Mar 23, 2009 | 2001 Chevrolet Silverado 1500
Dec 06, 2008 | 1998 Chevrolet Blazer
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: