ENGINE MISFIRING
Code p 0141 refers to heated oxygen sensor (HO2S) 2 bank 1--heater control--circuit malfunction===causes --wiring---HO2S--- ECM
code p 0144 refers to heated oxygen sensor(HO2S) 3 bank 1--high voltage ===causes wiring short to positive ---HO2S---ECM
also refers to oxygen sensor(O2S) 3 bank 1--high voltage ===causes wiring short to positive---O2S-- ECM
HO2S sensors are the units in the exhaust manifolds or before the cat converters
O2 sensors are after the cat converter
two completely different operations
use the special tool for sensors as the wires are easily damaged from the wrong tool use
as for misfiring you will get a P0300 (0300,0301,0302,0303 etc) depending on which cylinders are misfiring
when checking for misfiring the injectors , (blocked or not firing) are as important as plugs and wires
If the misfiring continues after sensor replacement , replace the ECM with a known good one as it is common to all fault codes and misfiring
P0141....O2 Sensor Heater Circuit (Bank 1 Sensor 2)
P0142....O2 Sensor Circuit Malfunction (Bank 1 Sensor 3)
P0143....O2 Sensor Circuit Low Voltage (Bank 1 Sensor 3)
P0144....O2 Sensor Circuit High Voltage (Bank 1 Sensor 3)
P0145....O2 Sensor Circuit Slow Response (Bank 1 Sensor 3)
P0146....O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 3)
P0147....O2 Sensor Heater Circuit (Bank 1 Sensor 3)
P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)
268 views
Usually answered in minutes!
×