I have a Subaru 2001 Impreza I need to know if the washer goes on the backside of the tension tightener

1 Answer

Marvin

Subaru Master 85,242 Answers
Posted on Jun 02, 2016

Marvin

Subaru Master

Joined: Jun 20, 2008

Answers

85242

Questions

Helped

29037622

Points

266281

No the front side.

5 Related Answers

Anonymous

117 Answers
Posted on Jul 02, 2008

SOURCE: 98 subaru impreza knock sensor

at the top of the block under the plenum runners.
please leave feedback
cheers

Anonymous

1 Answer
Posted on Apr 25, 2009

SOURCE: subaru impreza automatic transmission won t shift

Try replacing the transmission filter and the trannie fluid. Mine would only go in reverse, and now it drives pretty well. This year has a screw on filter. Hope this helps

Anonymous

382 Answers
Posted on May 11, 2009

SOURCE: 98 subaru impreza 5spd transmission bearing noise

Sure sounds like a throw out bearing having too much room. Might need adjustment.

Anonymous

270 Answers
Posted on Jul 30, 2009

SOURCE: Cigarette lighter fuse - 97 Subaru Impreza

small fuse

Anonymous

507 Answers
Posted on Oct 30, 2009

SOURCE: can't find where the rear wiper washer fluid goes

keep looking,its there have you removed the plastic cover?

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Wanting to know which wire and also which colour stripes goes were in 2004 Subaru Impreza car stereo please?

Question edited into English :>D

Jan 13, 2022 • 2004 Subaru Impreza

0helpful

1answer

How do I turn on my rear window wiper on my 1995 subaru

Try this - http://www.mttechsuba.com/used-subaru-impreza-parts/subaru-impreza-1998-2001/2293648

Read full answer

Jan 27, 2015 • 1996 Subaru Impreza

0helpful

1answer

My front washer fluid stopped working on my 2001 subaru impreza outback, I can't hear the motor when I activate it, what's the problem?

Have you check fluid levels? Sounds like there may be a clog with in the lines themselves. Check the lines after the motor. Good luck.

Read full answer

Apr 17, 2013 • Cars & Trucks

0helpful

1answer

How to tighten alternator belt on 1995 Subaru Impreza

do you not have a serpintine belt? this has no adjustment . It has a tension pully. If loose may need to replace belt. Good luck to you.

Read full answer

Mar 24, 2011 • Subaru Impreza Cars & Trucks

0helpful

1answer

Wat kind of tensioner is on a 01 subaru impreza sti timing belt

not sure i but would hazard a guess that its a idler pulley .

Read full answer

Dec 14, 2009 • 2001 Subaru Impreza

0helpful

1answer

I have a subaru ej20 turbo engine i am changing the head gaskits will be replasing them with steel head gaskits and need two know the tork settings can you help

Information taken from Subaru Impreza workshop manual.

Apply a coat of oil to washer and bolt threads.
First tighten all bolts to 29nm (22ft lbs) in this order.
Looking at head with front of engine on your left hand side
Top Middle
Bottom Middle
Top Left
Bottom Right
Bottom Left
Top Right
After doing this tighten them further to 69nm (51ft lbs) in the same order as above.
Back off (loosen) all bolts 180 degrees in same order as above.
Then back them off again another 180 degrees.
Tighten all bolts in the order above to 29nm (22ft lbs) followed by a further 80 to 90 degrees
Tighten all bolts in order as above a further 40 - 45 degrees
Tighten bolts Top Middle and Bottom Middle another 40 - 45 degrees

Job done.

Read full answer

Sep 15, 2009 • 1995 Subaru Impreza

1helpful

1answer