2000 Ford Ecursion. V10. Limited. I had to punch the lock on the driver's side door to gain entry to my vehicle. What replacement/repair parts do I need to order to fix it?
SOURCE: Drivers side door handle won't work
Some linkage maybe broken on the door handle. Door panel removal instructions are availablel on line www.carstereohelp.com/strford.htm but determining the problem will have to be found on your own.
SOURCE: How to replace '96 Ford Explorer driver side exterior door handle
You will need to remove the door panel to gain access to the handle. Roll the window up or down as needed to get to the nuts that attach the handle to the door. You will also need to remove a rod the goes to the door lock. You will see the rod after the door panel is removed. Good luck.
SOURCE: 2002 Ford Explorer - Drivers side door lock, rear
Aside from the fuses, your drive side power door lock may be failing to work because of a bad door-lock relay system, or, alternatively, the locking switch/button, itself, is not malfunctioning and in need of replacement.
A great handyman site that specifies the above probable causes and more is the following link:
http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Locks_Power_Locks_Do_Not_Lock_When_Pressing_Locking_Switch_Button.htm
Good luck!
SOURCE: Door locks on Ford Expedition stuck
Look under your steering wheel right under the dash. There should be a small white strip with 5 numbers. This is your master code for your vehicle. If you bought the car used and they give you a code, they could have made their own code, but the master will override it. If this don't help, the module for the doors may be going bad.
SOURCE: my FORD WINDSTAR 2000 SEL driver side sliding door
The door lock actuator is stuck in the lock position you will need to slim jim it open meaning you will have to lose the door lock actuator on the driver sideor replace the door lock lock actuator
195 views
Usually answered in minutes!
×